|
9 562 brands
2 694 000 user's guides |
|
Download your manual, it's FREE! Diplodocs allows you to download several types of document in order to best use your ZANUSSI ZH9015X : user manual, user guide, instruction manual.
|
|
Need help using a product?
|
|
User manual ZANUSSI ZH9015X
Manual abstract: user guide ZANUSSI ZH9015X
Detailed instructions for use are in the User's Guide. 2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
INSTALLATION
INSTALLATION
Fixing the wall brackets (cooker hood with chimney and with splashback)
Installation der Wandbleche (Haube mit Kamin und Rückwand)
DIMENSIONS 60 B mm 90 120 B mm
ABMESSUNG 60 90 120
162 180 180
360_61UK
162 180 180
360_61D
· Draw a vertical line on the wall at the centre of the area which was foreseen for the installation of the hood. Bracket (1) · See the preceeding paragraphs. Bracket (2) · Place bracket (2) on the wall aligning its centre at a distance of H+260 mm from the rear edge of the cooking appliance in the worktop. · Mark on the wall the centre of the two holes. For 120 cm hoods installed with a filter, it is not necessary to mount bracket 2. Just insert the base of the lower chimney I in the hood housing. Bracket (3) · Proceed as with bracket (2) but refer to the distance X from the ceiling which corresponds to the height of the upper chimney. Bracket (4) · Proceed as for the other brackets placing the bracket at about 1-2 mm from the ceiling or from the fixed position. Fitting the splashback · Refer to the preceeding paragraphs.
· Festlegung der Gerätemitte und Anzeichnung einer lotrechten Hilfslinie zur Decke an der Stelle, die für die Installation der Haube vorgesehen ist. Wandblech (1) · Siehe vorige Abschnitte. Wandblech (2) · Wandblech (2) an der Wand mit einem Abstand vom hinteren Rand des Kochfeldes von H+260 mm anlegen. · Der jeweilige Mittelpunkt der zwei ösenförmigen Löcher wird auf der Wand markiert. Für Hauben in 120 cm Breite die in Umluftbetrieb installiert werden, braucht die Wandlasche 2 nicht montiert zu werden. Es reicht das untere Kaminteil I in den Haubenkörper zu senken. Wandblech (3) · Wie bezüglich Wandblech (2) verfahren aber mit einem Abstand X von der Decke, der Höhe des oberen Teleskopteils entsprechen soll. Wandblech (4) · Wie unter 2+3 beschrieben, verfahren indem das Wandblech etwa 1-2 mm von der Dekke oder oberen Begren-zung angebracht wird. Anbringung der Rückwand · Siehe vorangehende TextPassagen.
360_17
1
360_18
40
42
44
46
48
50
52
54
56
58
4324086 02 - 0399
... |
|||||||
| Know our Partners | Frequently Asked Questions | Contact Diplodocs team | Last searches Latest additions |
Sitemap | ![]() |
||||||||
| Brands starting with A B C D E F G H I J K L M N O P Q R S T U V W X Y Z # | |||||||||||||
|
|
Copyright © 2005 - 2008 - Diplodocs -
All Rights Reserved. Designated trademarks and brands are the property of their respective owners. |