INSTRUCTION BOOKLET COOKER HOOD ZHC 925 Thank you for buying a Zanussi product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further information on Zanussi Products, please contact our Customer Care Department. For general enquiries concerning your Zanussi appliance or for further information, visit our website at http:\\www.zanussi.co.uk Customer Care Department Zanussi 55-77 High Street Slough Berkshire SL1 1DZ * Calls to this number may be recorded for training purposes. To register ownership, please ensure you complete and return the guarantee card supplied with the appliance. Tel: Fax: 08705 727727(*) 01753 538972 For the User Important Safety Information Your Appliance Operating Instructions Cooker Hood Controls To Operate Recirculation Extraction Maintenance and Cleaning External Cleaning Metal Grease Filters Charcoal Filters To Remove/Replace the Charcoal Filters Changing the Light Bulb For the Installer Technical Information Electrical Connection Electrical Requirements Electrical Connection Installing the Cooker Hood Installation Requirements Unpacking Clearance Heights Fitting the Wall Brackets Fitting the Canopy Hood Venting Recirculation Fitting the Chimney Stack Service Force Centres Something Not Working Service and Spare Parts Guarantee Conditions Guide to use the instruction book The following Symbols will be found in the text to guide you through the instruction book Safety instructions Step by step instructions 2 IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Installation · Any installation work must be undertaken by a qualified electrician or a competent person. This hood must be installed in accordance with the installation instructions and all measurements must be adhered to. If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance with the Gas Safety Codes of Practice BS.6172, BS.5440 and BS.6891 (Natural Gas) and BS.5482 (LP Gas) 1994, the Gas Safety (Installation & Use) Regulations, the Building Regulations issued by the Department of the Environment, the Building standards (Scotland) (Consolidated) Regulations issued by the Scottish Development Department. The fan motor of this cooker hood incorporates a cutout device which will operate if the cooker hood is installed below the minimum height recommended under section `Clearance Height', or if the motor becomes overheated. If the cut-out device is activated, switch off the fan motor and allow the cooker hood to cool. The cut-out device will reset itself when the fan motor has cooled significantly. It is dangerous to alter the specifications or modify this product in any way. When installed between adjoining wall cabinets the wall cabinets must not overhang the hob. If the room where the hood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the room sealed or balanced flue type. If other types of flue or appliances are fitted ensure that there is an adequate supply of air to the room. The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose. Do not install above a cooker with a high level grill. · Child Safety This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance. · During Use · · · This product is for domestic use only. Never leave frying pans unattended during use as over-heated fats and oils might catch fire. Never do flambé cooking under this cooker hood. Do not leave naked flames under the hood. · · · Maintenance and Service · This appliance can be a hazard if the synthetic paper and charcoal filters are not replaced as recommended. Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunction. Refer to your local Zanussi Service Force Centre. Always insist on genuine spare parts. · · · · · · · 3 YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Cooker Hood Controls The cooker hood functions are controlled by five push button switches located centrally in the control fascia. T1 T2 T3 T4 T5 Turns the worktop lighting On and Off Turns the fan motor On and Off Decreases the fan speed Increases the fan speed Intensive fan speed with timed programme. Select when cooking foods with strong odours or when frying. To cancel depress the button again. T1 T2 T3 T4 F T5 C 4 To Operate Select the required fan speed and light if required. The appliance can be installed to recirculate or extract contaminated air. The cooker hood is more effective when used in the extraction mode. Recirculation The cooker hood is supplied specified for use in the recirculation mode with the charcoal filter fitted. In the recirculation mode the contaminated air is passed through the charcoal filters to be purified and recirculated into the kitchen through the recirculation grilles in either side of the chimney stack. Extraction In the extraction mode the contaminated air enters the cooker hood passing through the grease filters and is passed out through the ducting into the atmosphere. To obtain the best performance when cooking it is advisable to switch the cooker hood on for a few minutes before you start cooking and leave it running for about 15 minutes after finishing. When used in the ducting mode the charcoal filters are not required. Never do flambé cooking under this cooker hood. Never leave frying pans unattended during use as overheated fats and oils can catch fire. Do not leave naked flames under the cooker hood. Ensure heating areas on your hob are covered with pots and pans when using the hob and cooker hood simultaneously. 5 MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warm soapy water using a mild detergent. Never use scouring pads or abrasive cleaners. Never use excessive amounts of water when cleaning particularly around the control panel. Metal Grease Filters The grease filters absorb grease and dust during cooking to help keep the cooker hood clean inside. Cleaning The filters must be washed when the LED lamp on the push button switch T2 starts to flash or at least once every month, using a normal household detergent; their compact dimension also enables them to be washed in a dishwasher. Allow to dry completely before replacing. Replacing Remove the filters one at a time, press against the metal catch to release the spring catch as illustrated in Fig. 1. When replacing, ensure that the handles face outwards. Enabling the alarm signal The hood is already primed to trigger an alarm when the grease filters become saturated with grease and this function does not need to be enabled. Resetting the alarm signal To reset the alarm proceed as follows: Depress T1 and T2 to switch off the lights and the fan motor; press T4 for at least 3 seconds, until the LED flashes to confirm the alarm has reset. The alarm will only function when the fan motor is switched on. GF Fig. 1 F FA GF Fig. 2 6 Charcoal Filters In the recirculation mode the charcoal filters absorb smells and unwanted odours. The charcoal filters cannot be cleaned or regenerated, and must be replaced when the Instensive speed LED T5 starts to flash, or at least once every 3 months. Attention: If, when used in the recirculation mode both the T2 and T4 LED indicator lights begin to flash simultaneously this indicates the both the charcoal filter needs replacing and the grease filters need cleaning. Replacing the charcoal filter First remove the metal grease filter GF as illustrated in Fig. 1. Carefully remove the screw from the centre of the charcoal filter, while holding the filter securely. Clean the grille before replacing the charcoal filter. To replace the charcoal filter, place the filter over the inlet grille and while holding the filter with one hand insert the screw and tighten by hand as illustrated in Fig. 3. This appliance can be a possible fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended. Changing the Light Bulb Unsrew the two screws from the frame around the lamp lens as illustrated in Fig. 4. Remove the lamp by carefully pulling it downwards until it clears the holder. When replacing the lamp, ensure the two pins are correctly positioned before inserting the lamp into the holder by applying carefull pressure to the lamp lens. If one of the halogen lamps has failed to function check that the lamps is correctly seated into the holder. If the lamp has failed then it should be replaced with a 20W spotlamp. Replacement filters and light bulbs can be obtained from your local Service Force Centre. FA Fig. 3 Fig. 4 7 SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Symptom The cooker hood will not start Solution · Check the hood is connected to the electricity supply. · Check that the fan speed control is set to 1, 2 or 3. The cooker hood is not working effectively · The fan speed is set high enough for the task. · The grease filter is clean. · The kitchen is adequately vented to allow the entry of fresh air. · If set up for recirculation, check that the charcoal filter is still effective. · If set up for extraction, check that the ducting and outlets are not blocked. · The safety cut-out device has been tripped. · Turn off the hob and then wait for the device to reset. The cooker hood has switched off during operation If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. SERVICE AND SPARE PARTS If you require an engineer or wish to purchase spare parts contact your local Service Force Centre by telephoning: For general assistance with your appliance or for information on Zanussi products please contact our Customer Care Department. Customer Care Department, Zanussi 55-77 High Street Slough Berkshire SL1 1DZ Tel: 08705 727 727(*) *calls to this number may be recorded for training purposes. 08705 929929 Your telephone call will be routed to your local Service Force Centre. The addresses are listed at the back of the book. 8 GUARANTEE CONDITIONS We, Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in product or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: · · · · · The appliance has been correctly installed and used only on the electrical supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's operating and maintenance instructions. The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or defective part replaced shall become the property of this company. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged. EXCLUSIONS This Guarantee does not cover: · · · · Damage or calls resulting from transportation, improper use or neglect, the replacement of any lamps or removable parts of glass or plastic. Costs incurred for calls to put right appliances improperly installed or calls to appliances outside the United Kingdom. Appliances found to be in use within a commercial environment, plus those which are the subject of rental agreements. Products of Zanussi manufacture which are not marked by Zanussi. This guarantee is in addition to your statutory and legal rights ...