English Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. It is dangerous to alter the specification in any way. Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation. eventual 400V poliphasic connection without earth wire will destroy the oven and the hob, if fitted. The manufacturer disclaims any responsability should all the safety measures not be carried out. Service Child Safety Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts. This appliance has been designed to be operated by adults and children under supervision. Young children MUST NOT be allowed to tamper with the controls or play near or with the oven. Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled. Environmental Information After installation, please dispose of the packaging with due regard to safety and the environment. When disposing of an old appliance, make it unusable, by cutting off the cable. It is most important that this instruction book is be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. During use This appliance has been designed for cooking edible foodstuff only and MUST NOT be used for any other purposes. Ensure that all control knobs are in the OFF position when not in use. Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance. If the appliance is out of order, disconnect it from the electric supply. Do not leave untensils containing foodstuffs, e. g. fat or oil in or on the appliance. This could cause damage in case the appliance is inadvertently switched on. Always place the dripping pan in position to collect fat when using the grill or when cooking meat. Pour a little water into the dripping pan to avoid smoke and unpleasant smells. Always use oven gloves to remove pans from the oven. For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the oven. This appliance is meant to operate with a singlephased connection to 230V electrical supply. An Guide to Use the instructions Safety Instructions The following symbols will be found in the text to guide you throughout the Instructions: F Step by step instructions for an operation Hints and Tips Environmental information - This appliance complies with the following E.E.C. Directives: 73/23 - 90/683 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility Directive); 93/68 (General Directives) and subsequent modifications. MANUFACTURER: ELECTROLUX ZANUSSI S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy) 46 Contents For the User Important Safety Information Description of the Oven When the oven is first installed Electronic programmer (ZOB 881) Using the oven Cooking Tables Cleaning and maintenance Technical Assistance Something not working... 46 47 49 50 52 53 55 57 57 For the Installer Technical Data Installation 58 58 OVEN DOOR PROTECTION DEVICE (stainless steel models) All our appliances comply with the European Safety Standards. Nevertheless, in order to ensure the highest safety level, and avoid little children to be exposed to the heat when the appliance is operated, it is possible to fit a special protection device to the oven door. This device can be purchased in our Service Force Centres, specifying the relevant code ( 3 5 7 9 1 ) and the Product No. shown on the rating plate. Fitting instructions are provided with the kit package. Description of the Oven Push-Push control knobs (ZOB 881) Some models are provided with push-push control knobs (Fig. 1). These knobs can be completely sunken inside the control panel when the oven is not working. Oven function control knob (Fig. 2) - ZOB 881 The oven function control knob can have the following symbols and functions: 0 OFF Oven Light - The oven light will be on without any cooking function Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven. Top heating element - The heat comes from the top of the oven only. Bottom heating element - The heat comes from the bottom of the oven only. Inner grill element only - can be used for grilling small quantities. Double Grill - The full grill element will be on. Thermal Grilling - This function offers an alternative method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food. When using this function, select a maximum temperature of 200°C and do not exceed 1 hour of operation. Fan cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference. Defrost Setting - This setting is intended to assist in thawing of frozen food. Fig. 2 FO2589 Fig. 1 FO0350 47 Oven function control knob (Fig. 3) ZOB 661 The oven function control knob can have the following symbols and functions: 0 OFF Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven. Bottom heating element - The heat comes from the bottom of the oven only. Fan cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference. Inner grill element only - can be used for grilling small quantities. Fig. 3 FO 2572 Defrost Setting - This setting is intended to assist in thawing of frozen food. 50 Double Grill - The full grill element will be on. 250 Thermostat control knob (Fig. 4) Turn the thermostat control knob to select temperatures between 50°C and 250°C (MAX). 100 Thermostat control light (°C) Once the oven temperature has been selected, the temperature light will come on and remain on until the oven has reached the correct setting; after that, it will go on and off with the thermostat, showing how the temperature is being maintained. Fig. 4 FO 2617 50 Oven control light It will come on every time an heating element is set on operation. 100 End of cooking programmer (ZOB 661) This device (Fig. 5) allows you to make the oven switch off automatically once the preset time is over. An acousitic signal will be heard when the cooking is completed.The cooking duration can be set up to 90 minutes maximum. Place food in the oven and turn the oven function control knob and the thermostat control knob on the required settings. Turn the timer knob to maximum time position, then turn it back to set the required cooking time. When the cooking time is over, an acoustic alarm will sound and the oven will switch off automatically. Turn the timer knob on to set the oven on manual operation. FO 2630 15 10 5 30 Fig. 5 FO 2588 48 0 20 0 20 45 150 150 max 90 75 60 The Safety Thermostat This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Zanussi Service Centre. Under no circumstances should you attempt to repair the appliance yourself. The Cooling Fan for the Controls This oven is provided with a cooling fan, meant to keep the front panel, the knobs and the oven door handle cool. This fan may run on after the oven or grill is switched off, until a normal temperature is reached. When the oven is first installed Before cooking for the first time, carefully wash the oven accessories. Mod. ZOB 881: The oven will work only if the time of day has been set (please read the relevant instructions). Once the oven has been installed: a) set the thermostat knob to MAX (250); b) switch the oven function control knob to conventional cooking ( ); c) allow the oven to run empty for approximately 45 minutes; d) open a window for ventilation. During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing. Repeat this operation for the grill and fan cooking function. Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water. To open the oven door, always catch the handle in its central part (Fig. 6). Fig. 6 FO 2161 49 Electronic programmer (ZOB 881) 4 5 6 7 8 1. Push button for selecting a function 2. Decreasing control button 3. Increasing control button 4. Display 5. Cooking Duration pilot lamp 6. End of cooking pilot lamp 7. Minute minder pilot lamp Fig. 7 2 1 3 FO 2571 8. Time of day pilot lamp The oven will work only if the time of day has been set. Moreover, the oven can also be operated without any programme. Setting the time of day When the power supply is switched on, or after a power failure, the Time of day pilot lamp will flash on the display. To set the correct time of day: 1. press button or . 2. After the setting is carried out, wait for 5 seconds: the Time of day pilot lamp will go out and the display will show the set time. The appliance is ready for use. To reset the correct time of day: 1. press button repeatedly to select the Time of day function. The relevant pilot lamp will start flashing. Then proceed as described above. The time of day may be reset only if no automatic function (cook duration or end of cooking ) has been set. Cooking Duration function Thanks to this function, the oven will automatically switch off at the end of a programmed cooking duration time. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the Cooking Duration function. The relevant pilot lamp will start flashing. Then, proceed as follows: To set the duration time: 1. press button or . 2. After the setting is carried out, wait for 5 seconds: the "Cooking Duration" pilot lamp will come on and the display will revert to the time of day. 3. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: when doing this operation, the oven will be operated again, therefore, remember to turn the oven function and the thermostat control knob to zero at the end of the cooking time. To cancel the duration time: 1. Press button repeatedly to select the Cooking Duration function. The relevant pilot lamp will flash and the display will show the remaining cooking time. 2. Press button until the display shows 0:00. After 5 seconds the pilot lamp will go out and the display will revert to the time of day. 50 Thanks to this function, you can set the oven to switch off automatically when a programmed end of cooking time is over. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the End of cooking function. The relevant pilot lamp will start flashing. Then, proceed as follows: To set the End of cooking time: 1. press button or . 2. After the setting is carried out, wait for 5 seconds: the End of cooking pilot lamp will come on and the display will revert to the time of day. 3. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: when doing this operation, the oven will be operated again, therefore, remember to turn the oven function and the thermostat control knob to zero when cooking is over. To cancel the End of cooking time: 1. Press button repeatedly to select the End of cooking function. The relevant pilot lamp will flash and the display will show the programmed End of cooking time. 2. Press button until the display shows the cu ...