User manual ZAVIO F210A - QUICK INSTALLATION GUIDE

1 Zavio F210A Quick Installation Guide Please follow the installation steps below to set up your F210A IP Camera. Check the package contents against the list below. See P.1 Physical overview. See P.1 Install the hardware and connect all cables. See P.2 Using the software CD to install Intelligent IP Installer. See P.2 Access the IP Camera using Intelligent IP Installer. See P.2 Change the Web Interface into your preferred language. See P.4 Using IP Camera via Mobile Phone. (3GPP, 2.5G WAP, 2.5G browse viewing) See P.4 Microsoft Live Messenger Setting. See P.5 Access to Internet via Static IP, Dynamic IP or both. See P.6 For more information, please check the User Manual available in the Software CD or you can download the latest software from http://www.zavio.com Package Contents Camera Quick Installation Guide Software CD F210A IP Camera Brief product information and quick installation IP Surveillance Software IP Surveillance Software Pro Trial Intelligent IP Installer User Manuals Language Packs Mounting Bracket Adaptor Three screws, Lock ring, Brace, and Base plate 5V DC, max 4.5W Physical overview Focus Adjustment Ring: Adjust the focus ring to get a clear image. Reset: When the device is empowered, press the Reset Button to reboot the device, or hold the Reset Button for 10 seconds to set the settings back to factory default 2 Install the hardware and connect all cables a. Wall mounting and Ceiling mounting 1. Use the 3 supplied screws to fix the base plate to a flat surface. 2. Loosen the lock ring to adjust the desired angle of the camera. 3. Tighten the lock ring. b. Connect all cables 1. Use a standard RJ-45 network cable to connect the IP Camera to the Network connection 2. Connect power adaptor to the IP Camera. Using the software CD to install Intelligent IP Installer Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow those steps to install the firmware. Select "Intelligent IP Installer" and follow the installation process to complete the installation. Access the IP Camera using Intelligent IP Installer 1. Before using Intelligent IP Installer, please check two setting. a. Browser's Internet Properties Security Default Level b. Browser's Internet Properties Privacy Uncheck Pop-up Blocker 3 2. Click the Intelligent IP Installer ICON on your desktop. The main page will show up listing all active camera and video server devices. Select the relevant IP camera from the list and click Link to IE. 3. Enter your Username and Password to login to the IP Camera. (Default is admin / admin) 4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar: This website wants to install the following add-on: `AxvideoView.cab from `Zavio Inc'. F210A IP Camera 5. Click the information bar, and select Install ActiveX control. F210A IP Camera 4 6. Click Install. F210A IP Camera 7. Live video displays in the centre of your web browser. F210A IP Camera Change the Web Interface into your preferred language Use the settings screen to set the language of the Web Interface. Go to "Setting Basic System Initialize". 1. Insert Software CD into your CD-ROM. 2. Browse and select the preferred language from language pack in the Software CD and then click OK. 3. The web interface will change into your preferred language. Use IP Camera via Mobile Phone (3GPP, 2.5G WAP, 2.5G Browser Viewing) a. 3G Mobile Phone Streaming Viewing For 3G mobile phone viewing, please type " rtsp://:/video.3gp " into your 3G web browser. is the IP address of your IP camera; PORT> is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp b. 2.5G Mobile Phone Viewing b1. WAP viewing For 2.5G WAP mobile phone viewing, type " /mobile.wml " into your 2.5G web browser. b1. Browser viewing For 2.5G mobile phone browser viewing, type " /mobile.htm " into your 2.5G web browser. 5 Microsoft Live Messenger Setting Live video of the IP Camera can be displayed using Microsoft Live Messenger, whilst providing its public IP address to users for access via the web browser. This feature is useful especially when the IP address of the camera is dynamically assigned. If you wish to set up MSN Messenger, enter the camera's setting page. Go to "Setting Basic System Network Messenger", set the Messenger option "On." 1. Create a new MSN Messenger account (e.g.: Camera at home) for the IP Camera. 2. Enter the new MSN Messenger Login Account and Password within the designated boxes. 3. Under the IP Notification Option, Click "On" to enable IP notification to the users. 4. Under the Privacy Option, Click "On" to create an allow list. Messenger 5. Use your existing account to login to MSN Messenger. 6. Add the new MSN Messenger account (e.g.: Camera at home) to your contact list. 7. The IP Camera will send you a message with its Public IP and Private IP if the IP Notification Option is enabled. 8. Click on the small camera icon. Then, choose "View a new contact's webcam". Camera at home says: 9. The IP Camera accepts your invitation and its live video is displayed on the right screen 6 Access to Internet a. Internet connectivity of the IP camera can be established by inputting the cameras IP information within the Information section. (Please go to Setting Basic Network Information) b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the Ethernet) by inputting the username and password from your Internet Service Provider (ISP) within the PPPoE section. (Please go to Setting Basic Network PPPoE) Note 1: Please reboot the IP Camera, after changing the PPPoE settings. Note 2: Please turn on the DDNS and IP Notification function when using PPPoE. 7 c. Internet Connectivity of the IP Camera can be established if your router is UPnP (Universal Plug and Play) enabled. The IP camera is automatically detected and added to "My Network Places" on your computer. Please note that only Home Routers manufactured after 2006 support the UPnP function. c1. If your router is a UPnP Internet Gateway Device (IGD), turn on the UPnP function within the UPnP section. (Please go Setting Basic Network UPnP) Note: If you turn on the UPnP Port Forwarding function, RTSP (Real Time Streaming Protocol) Port information will change to the illustrated value below. c2. If your router is not a UPnP Internet Gateway Device, please setup Port Forwarding or Port Mapping Note 1: Home Routers manufactured before 2006 do not support UPnP IGD function. Note 2: Enterprise Routers do not support UPnP IGD function. 8 9