CD/MP3 Player with RDS Tuner Operating Instructions Einbau- & Bedienungsanleitung ZE-20MP3 Safety Information PRECAUTIONS Use only in a 12-volt DC negative-ground electrical system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes. Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normals before operating the unit. Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.). Contents Safety Information ...................Page2 Panel Controls.................................3 Other Instruction..............................4 Button Tips......................................5 MP3 Playback ...................................6 MP3 Character Search .......................7 MP3 Overview .....................................8 RDS Menu Function..........................9 RDS (continued) ...............................10 RDS Basics ................................11-13 Electrical Connections....................14 Installation Guide...........................15 Anti-Theft System ...............................16 Trouble Shooting ............................17 Specifications ......................................34 Warranty Conditions ......................................35 * In addition to ordinary CDs, this unit can playback a CD - R or CD - RW . CD Notes Playing a defective or dusty CD can cause dropouts in sound. Hold CDs as illustrated. DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection sheet to either side of a disc. DO NOT expose a CD to direct sunlight or excessive heat. Wipe a dirty CD from the center outward with a cleaning cloth. Never use solvents such as benzine or alcohol. This unit cannot play 3-inch ( 8cm ) CDs. NEVER insert a 3-inch CD contained in the adapter or an irregularly shaped CD. The unit may not be able to eject it, resulting in a malfunction. Before operation DO NOT raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operation. CAUTION DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help. 2 Panel Controls Power on : press any button on the panel except Power ON/OFF to turn on the unit. Press to tune in a preset station Hold for more than 2 seconds to store station. Radio preset Panel Open Alternative Frequency Region List Radio tune Track seek PWR CD/MP3 PLAYER WITH FM/AM TUNER CM 700 DN 4X45W AF REG on/off TA VOL Traffic Announcements Identification Program Type Radio Disc play (when disc is in) Aux in (Optional) SRC PUSH SEL/MENU UP PTY TOP MUTE DISP INT RPT RDM SEARCH 1 2 3 4 5 6 BAND AMS Push less than 2 seconds to band switch CD changer disc down Rotate the knob to adjust volume level Play / Pause Top play ( press more than 2 sec.) s Intro play(10sec) FM1 Display switch FM2 FM3 MW1 MW2 AMS M P3 track / file/character search (See Page 11) Radio preset scan MP3 track-10 down Push more than 2 seconds to Menu mode( page 10) M P3 track / file /character search ( page 11) MP3 track+10 up Track repeat play Push to select VOL/BAS/ TRE/BAL/FAD, press - or + to adjust level Radio auto preset CD changer disc up Mute Track random play 3 Other Instruction Press the button to open the panel and press to eject the disc. Disc Eject Slot ,Insert the disc Panel status indication: When the panel slide down it will light up. When the panel detached from body it will flash. 4 Button Tips Disc Load / Eject button to slide down Load : press the panel. Inser t the disc into the slot . Eject : press button to slide down the panel. Press to eject the disc . Radio: Radio tune by step: press less than 0.5 seconds. Radio seek automatic : press more than 0.5 seconds. See page 10. Disc Playback: Track skip : press less than 0.5 seconds to go to the next or previous track. Track seek : press more than 0.5 seconds and hold it to forward or reverse back the track. AMS : Auto Memory Store Press briefly to scan the preset station for 5 seconds each. Hold more than 2 seconds,the 6 strongest available station will be automatically saved in the memory of preset button . SEARCH AMS DN VOL SET CLOCK Press DISP button, time displays. Press again more than 2 seconds, time display blinks. Rotate the knob clockwise to set hours. Rotate the knob anticlockwise to set minutes. DISP UP PUSH SEL/MENU 5 MP3 Play Back While playing MP3 disc, the folder/file name and ID3 TAG (Song title, Album and Artist) can entirely scroll displayed on the LCD display. M P3 ALBUM MUSIC ARTIST Elapsed playing time & Track number Folder name & number File name & number Song title Album title Artist name SEARCH AMS MP3 Track search Press AMS button to select "TRACK SCH" mode. Press SEL button and LCD display will show "001". IF your desired track number is less than 100, Rotate the knob to select the first digit and press SEL button once again And rotate the knob to set the tenth digit of the track number. Press SEL button again more than 0.5 seconds to play the track. VOL ALBUM MUSIC ARTIST M P3 ALBUM MUSIC ARTIST DN M P3 UP PUSH SEL/M ENU IF your desired track number is more than 100, Rotate the knob to select the first digit and press SEL button to confirm, * If the track number you enter is Rotate the knob to select the tenth digit and press SEL button to confirm, beyond the maximum file number, Rotate the knob to select the hundredth digit and press SEL button to confirm, last song will be played. Press SEL button again to play the track. IF you just want to play songs of this folder, press SEL button more than 0.5 seconds to play the first track of the folder. IF you want to play desired track of the folder, press SEL button and rotate the knob to select the track you want. Press SEL button again to play the track. MP3 File search Press AMS button twice to select "FILE SCH" mode. Press SEL button to enter. Rotate the knob to select folder. ALBUM MUSIC ARTIST MP3 6 MP3 Character Search Press AMS button three times to select "CHAR SCH" mode. Press SEL button and "A" displayed. Now If press SEL button more than 0.5 seconds. the track which first character of its name is "A" will be played. Rotate the knob to select the 1st character of the desired track name and press SEL button to confirm.. Then "A" flashs at the next place, select 2nd and other character of the desired track name as steps above. Press SEL more than 0.5 seconds to play the track of the select name. VOL AMS DN Example :to search character "ECHO". UP PUSH SEL/MENU ALBUM MUSIC ARTIST ALBUM MUSIC ARTIST M P3 M P3 ALBUM MUSIC ARTIST ALBUM MUSIC ARTIST M P3 M P3 ALBUM MUSIC ARTIST ALBUM MUSIC ARTIST M P3 M P3 7 MP3 Overview Note on MP3 MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM (CD-R or CD-RW discs). The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write. The unit can not read an MP3 file that has a file extension other than ".mp3". If you play a non - MP3 file that has the ".mp3 " extension, you may hear some noise. In this manual, we refer to what are called "MP3 file" and "folder" in PC terminology as "track" and "Album," respectively. Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per disc is 256 . The unit may not play tracks in the order of Track numbers. The unit plays only the audio Tracks if a disc contains both audio tracks and MP3 files. When playing a disc of 8k bps or *VBR, the elapsed playing time in the display window will not be correct and also the intro p lay may not function properly. *VBR: Variable Bit Rate. Note on creating your own CD-Rs or CD-RWs containing MP3 files To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 256 M P3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder). When CD-R disc is used, playback is possible only for discs which have been finalized. Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio disc. You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. In this case, data may not be reproduced correctly. High quality CD-R or CD-RW discs are recommended. Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required. Note that the unit may not play Tracks in the order that you wrote them to the disc. 8 RDS Menu Function DN Press the button more than 2 seconds to enter menu mode , then each press changes the mode as follows: VOL TA mode UP MASK mode DSP mode LOCAL / DX mode VOL mode LOUD ON / OFF mode BEEP ON / OFF ST / MO mode SEEK1/2 mode (only in tuner mode) TA mode: Rotate the knob to choose TA ALARM or TA SEEK mode, When TA is turned on and no traffic program identification code has been received during the specified time, no TA/TP is displayed and according to the MENU SELECT, alarm is set off, or TA SEEK is activated. TA ALARM mode : NO TA/TP is displayed and alarm is set off. ALBUM MUSIC ARTIST TA SEEK mode: TA SEEK is activated. ALBUM MUSIC ARTIST MASK mode: DN rotate the knob VOL MASK DPI mode : Only the AF which has different program identification is masked. MASK ALL mode : The AF which has different program identification and NO RDS signal with high field strength is masked. ALBUM MUSIC ARTIST to choose MASK DPI or MASK ALL mode. UP ALBUM MUSIC ARTIST 9 RDS Menu Function (continued) DN DSP mode: Rotate the knob to choose DSP sound effect: VOL POP ROCK CLASSIC FLAT DSP OFF LOUD mode: Rotate the knob to choose loud on or off. BEEP ON/OFF mode: Rotate the knob to choose button beep sound on or off. UP SEEK 1/2 mode: Rotate the knob to choose radio seek mode 1 or 2 . SEEK 1: searching station will stop when next station is received. SEEK 2: searching station will stop when or button is released and next station is received. ALBUM MUSIC ARTIST LO/DX mode: Rotate the knob to choose tuner sensitivity local or distant. ST/MO mode: Rotate the knob to choose FM stereo or mono. VOL LAST / ADJUST MODE ALBUM MUSIC ARTIST Press knob to choose VOL LAST : the turn-on volume level is the volume level of latest power off. Rotate knob to choose VOL A DJ, then rotate the knob to set the turn-on volume level . ALBUM MUSIC ARTIST 10 RDS Basics RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. The following functions are available when receiving RDS stations. RDS Basics AF( Alternative Frequency list ) When reception is poor, an RDS station broadcasting the same program is tuned in automatically. PS Display ( Program Service name ) The name of station is displayed instead of frequency. AF Mode : Press AF button less than 1 second to switch AF mode on and off. AF indication on LCD will flash until RDS information is received. REG Mode : Press AF button more than 1 second to switch REG mode on and off. ALBUM MUSIC ALBUM MUSIC ARTIST The frequency is changed only for programs within the region. The frequency is changed also for programs outside the region. ARTIST ALBUM MUSIC ARTIST During FM mode when AF is on, radio seek, scan and AMS functions can only receive and save RDS program. CT Service ( Clock Time ) When receiving an RDS station, the CT ( Clock Time ) service automatically adjusts the time. NO CT is displayed in areas where CT service is not available. ALBUM MUSIC ARTIST EON 11 RDS Basics ( continued ) Traffic Announcements Some RDS FM stations periodically provide traffic information. TP ( Traffice Program Identification ) Broadcasting of traffic information TA ( Traffic Announcements Identification ) Radio announcements on traffic conditions TA Mode: Press TA button to turn on / off TA. When TA mode is on and TA indicater on LCD is displayed. ALBUM When traffic announc ...