User manual ZENITH 50PC1DR-UA

42LB1DR 42LB1DRA 50PC1DR 50PC1DRA As an ENERGY STAR Partner LGE U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy drriciency. P/NO: 38289U0512E c WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. WARNING / CAUTION FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user's authority to operate this product 1 Ow ner Ma nu al SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled "Important Safety Instructions". The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer's option, a picture or drawing that illustrates the intent of a specific safety instruction may Ow ner be placed immediately adjacent to that safety instruction : M a Ow ner nual Ma nu al Ow ner Ow ner Ma SAFETY INSTRUCTION Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. nu al al Ow ner Ma nu Ow ner M Ma nu al anu al Do not use this apparatus near water Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Clean only with dry cloth. Ow ner Ma nu al Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Ow ner Ma nu al Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Only use attachments/accessories specified by the manufacturer. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. Ow ner M anu al 2 Ow ner Ma nu al Ow ner Ma nu al Ow ner Ma nu al Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Ow ner Ma nu al Ow ner Ma nu al Ow ner Ma nu al SAFETY INSTRUCTION Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. Outdoor Use Marking : WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of 3 CONTENTS WARNING / CAUTION ........................... 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . 2-3 INTRODUCTION Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TV Guide On ScreenT M Notices for U.S.A/ Digital Cable Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 7 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Controls (Model Name: 50PC1DR/50PC1DRA) . . . 10 Connection Options (Model Name: 50PC1DR/50PC1DRA) . . . . . . . . . . . 1 1 Controls (Model Name: 42LB1DR/42LB1DRA) . . 12 Connection Options (Model Name: 42LB1DR/42LB1DRA) . . . . . . . . . . . . 13 Remote Control Key Functions . . . . . . . . . . . 14-15 BASIC OPERATION Turning the TV on . . . . . . . . . . . . . . . . . . . . . . . . 36 On-screen Menus Language Selection . . . . . . . 37 Initial Channel Search (EZ Scan) . . . . . . . . . . . . 38 Channel Selection . . . . . . . . . . . . . . . . . . . . . . . .39 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . 39 CONTENTS TV GUIDE ON SCREENTM SYSTEM TV Guide On ScreenTM Setup . . . . . . . . . . . . 40-43 TV Guide On ScreenTM Feature . . . . . . . . . . 44-64 - Overview - Screen Components - Panel Menu - Main Services Listings | Search | Recordings Schedule | Setup - Record And Remind Features Record | Remind INSTALLATION Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 8 Wire Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1 Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SPECIAL FUNCTIONS CONNECTIONS & SETUP Antenna or Cable Connection . . . . . . . . . . .20-21 CableCARDTM Setup . . . . . . . . . . . . . . . . . . . . . . 21 HDSTB Setup . . . . . . . . . . . . . . . . . . . . . . . 22-24 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26 External A/V Source Setup . . . . . . . . . . . . . . . . . 27 AV Out Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Digital Audio Output . . . . . . . . . . . . . . . . . . . . . 29 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-35 DVR (Digital Video Recorder) Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-67 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-70 Manual Recording . . . . . . . . . . . . . . . . . . . . . . . . 71 Recorded TV . . . . . . . . . . . . . . . . . . . . . . . . . 72-77 PIP/POP/Twin Picture (Multiple Screen) Watching PIP/POP/Twin Picture . . . . . . . . . . . . .78 Selecting an Input Signal Source for PIP/Twin Picture 79 TV Program Selection for PIP . . . . . . . . . . . . . . . 79 Moving the PIP sub picture . . . . . . . . . . . . . . . . 79 Swapping PIP/Twin Picture . . . . . . . . . . . . . . . . . 80 Adjusting Main and Sub Picture Sizes for Twin Picture 80 POP(Picture-out-of-Picture: Channel Scan) . . . . . . . 81 4 TV MENU On Screen Menus Selection and Adjustment . . 82 Setup(Channel) Auto Channel Search (EZ Scan) . . . . . . . . . . . . 83 Manual Channel Search (Manual Scan) . . . . . . . 84 Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 DTV Signal Strength . . . . . . . . . . . . . . . . . . . . . . 86 Main Input Source Selection . . . . . . . . . . . . . . . 87 Auto Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . .1 13 Caption / Text . . . . . . . . . . . . . . . . . . . . . . 1 15 14-1 Caption Option . . . . . . . . . . . . . . . . . . . . . . . . 1 16 ISM Method (50PC1DR/50PC1DRA only) . . 1 17 Low Power (50PC1DR/50PC1DRA only) . . . 1 8 1 HDD Format . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 19 Bried Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 CONTENTS Lock Adjustment Setting up your password . . . . . . . . . . . . . . . . . 121 Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Set Password . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Block Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Movie Rating (MPAA) (for USA only) . . . . . . . . . . . . . . 124 TV Rating Children (for USA only) . . . . . . . . . . . . . . . . . . 125 TV Rating General (for USA only) . . . . . . . . . . . . . . . . . . . 125 TV Rating English (for Canada only) . . . . . . . . . . . . . . . 126 TV Rating French (for Canada only) . . . . . . . . . . . . . . . 126 Input Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Video Adjustment Auto Picture Control (EZ Picture) . . . . . . . . . . . 90 Adaptive Picture Mode (APM). . . . . . . . . . . . . . .91 Manual Picture Control (EZ Picture-User Option) . .92 Color Temperature Control . . . . . . . . . . . . . 93-94 XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Advanced - Cinema 3:2 Mode . . . . . . . . . . . . . . . . . . . . . . . . . 96 Advanced - Black Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Video Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 CableCARDTM Function Cable menu options . . . . . . . . . . . . . . . . . . . . . .128 Scrambled channel . . . . . . . . . . . . . . . . . . . . . . 129 Cable Channel List . . . . . . . . . . . . . . . . . . . . . . .130 Emergency Message Alert . . . . . . . . . . . . . . . . 130 Audio Adjustment Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . 99 Auto Volume Leveler (EZ SoundRite) . . . . . . . 100 Auto Sound Control (EZ Sound) . . . . . . . . . . . 101 Manual Sound Control (EZ Sound-user Option) . . 1 03 02-1 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 TV Speakers On/Off Setup . . . . . . . . . . . . . . . 105 BBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . 107 APPENDIX External Control Device Setup . . . . . . . . . .131-137 IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . .138-139 Programming the Remote Control . . . . . . . . . 140 Remote Control Codes . . . . . . . . . . . . . . 141-143 Troubleshooting Checklist . . . . . . . . . . . . 144-146 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Product Specifications . . . . . . . . . . . . . . . . . . . 147 Time Setting Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . 108 Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . .109 On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . . 1 10 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1 1 Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 12 . Optional Features 5 INTRODUCTION BENEFITS What is a Plasma TV ? Using plasma is the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. cells. A few cell defects will normally occur in the Plasma TV manufacturing process. Several tiny, minute colored dots visible on the screen should be acceptable. This also occurs in other Plasma TV manufacturers' products. The tiny dots appearing does not mean that this Plasma TV is defective. Thus a few cell defects are not sufficient cause for the Plasma TV to be exchanged or returned. Our production technology minimizes these cell defects during the manufacture and operation of this product. INTRODUCTION How does it work? Plasma TV is an array of cells, known as pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue. Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green, or blue). These phosphors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors. Plasma TV offers a rich, dynamic display because each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. This means that you get perfect images that are easily viewable in a display that is fewer than five inches thick. Cooling Fan Noise In the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the Plasma TV is equipped with cooling fans to cool the Monitor and improve its reliability. Therefore, a certain level of noise could occur while the fans are operating and cooling the Plasma TV. The fan noise doesn't have any negative effect on the Plasma TV's efficiency or reliability. The noise from these fans is normal during the operation of this product. We hope you understand that a certain level of noise from the cooling fans is acceptable and is not sufficient cause for the Plasma TV to be exchanged or returned. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle of over 160 degrees. This means that the display is clear and visible to viewers anywhere in the room. FOR LCD TV If the TV feels cold to the touch, there may be a small "flicker" when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. Wide Screen The wide screen offers a theater-like experience in your own home. Multimedia Connect your plasma display to a PC and use it for conferencing, games, and Internet browsing. The Picture-in-Picture feature allows you to view your PC and video images simultaneously. Versatile The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs do not fit. The Plasma TV Manufacturing Process: a few minute colored dots may be present on the Plasma TV screen The Plasma TV is composed of 0.9 to 2.2 million 6 Official term for an HDTV that conforms to the plugand-play digital cable TV standard using POD (Point of Deployment) access cards, also called CableCARDs, that allow users to plug the cable directly into an HDTV set and enjoy HDTV and digital cable without having to use a separate set-top box. Manufactured under license from Dolby Laboratories. "Dolby "and the double-D symbol are trademarks of Dolby Laboratories. R R TruSurround XT is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TruSurround XT High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. INTRODUCTION Manufactured under license from BBE Sound, Inc. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." A Digital Video Recorder (DVR) is a device that empowers you to control what you watch, when you watch it. It allows you to store and access TV programs - functioning like a VCR, but with no videotape. With a DVR, you can also pause live TV and choose the shows you want to record through an electronic program guide. LG's own special digital image generator, consisting of a full digital image processor, APM mode & six different main picture quality factors. TV GUIDE ON SCREENTM NOTICES FOR U.S.A. Trademark Notice TM In the United States, TV GUIDE and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or one of its affiliates. In Canada, TV GUIDE is a registered mark of Transcontinental Inc., and is used under license by Gemstar-TV Guide International, Inc. License Notice The TV Guide On ScreenTM system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of its affiliates. Patent Notice The TV Guide On ScreenTM system is protected by one or more of the following issued United States patents 6,498,895, 6,418,556, 6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578; 4,706,121. Use of the CableCARDTM TradeMark. "CableCARDTM is a trademark of Cable Television Laboratories, Inc." DIGITAL CABLE COMPATIBILITY This digital television is capable of receiving basic analog, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A security card provided by your cable operator is required to view encrypted digital programming. Cable operator enhanced program (For example, electronic program guide provided by the cable operator), and data enhanced television service may require the use of a set top box. For more information contact your local cable operator. 7 INTRODUCTION ACCESSORIES Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. TV INPUT TV/VIDEO MODE INTRODUCTION DAY - DAY + Owner's Manual 1.5V 1.5V FLASHBK APM CC AUTO DEMO M/C EJECT Owner's Manual Batteries Remote Control Power Cord D-sub 15 pin Cable 75 Round Cable Polishing Cloth Polish the screen with the cloth. For 50PC1DR / 50PC1DRA 2-Wall brackets 2-eye-bolts For 42LB1DR / 42LB1DRA 2-TV Bracket Bolts 2-TV Brackets, 2-Wall Brackets Cable Management Twister Holder Arrange the wires with the twister holder. 8 HOME MENU This menu is a contents guide. In HOME Menu, you can enter the recorded list of DVR, TV Guide, Schedule of the TV Guide, Manual Record of DVR or TV Menu. INTRODUCTION DVR p.65 TV Guide p.40 TV Menu p.82 9 INTRODUCTION CONTROLS This is a representation of the front panel of models 50PC1DR, 50PC1DRA series TVs. I Here shown may be somewhat different from your TV. Front Panel Controls 10 INTRODUCTION Remote Control Sensor Power Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks white and then illuminates white before the picture is displayed. TV POWER GUIDE Button Button INPUT Button MENU Button VOLUME (F,G)Buttons FG CHANNEL (E,D)Buttons ED CONNECTION OPTIONS This is the back panel of models 50PC1DR, 50PC1DRA series TVs. Back Connection Panel Cable CARD AV IN 2 S-VIDEO Input Provides better picture quality than the video input. AUDIO Input Connections are available for listening to stereo sound from an external device. VIDEO Input Connects the video signal from a video device. INTRODUCTION CableCARDTM Used for CableCARDTM Cable Service Provider. R L/MONO AV OUT Connect a second TV or monitor. AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. COMPONENT IN Connect a component video/audio device to these jacks. HDMI IN Connect a HDMI signal to 1(DVI) or 2. Or DVI(VIDEO)signal to the 1(DVI) port with a DVI to HDMI cable. DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. ANTENNA IN Connect over-the air signals to this jack. CABLE IN Connect cable signals to this jack. RGB/AUDIO IN Connect the monitor output from a PC to the appropriate input port. Remote Control Port Connect your wired remote control. Power Cord Socket For operation with AC power. Caution : Never attempt to operate the TV on DC power. 11 INTRODUCTION CONTROLS This is a representation of the front panel of models 42LB1DR, 42LB1DRA series TVs. I Here shown may be somewhat different from your TV. Front Panel Controls 12 INTRODUCTION POWER Button TV GUIDE Button INPUT Button MENU Button VOLUME (F,G)Buttons G CHANNEL (E,D)Buttons D Power Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks white and then illuminates white before the picture is displayed. Remote Control Sensor INDEX Digital Cable Ready HDTV mode HDMI1/DVI or HDMI2 mode Recording Setting the reserve record Operating the TimeShift CONNECTION OPTIONS This is the back panel of models 42LB1DR, 42LB1DRA series TVs. Back Connection Panel Cable CARD S-VIDEO Input Provides better picture quality than the video input. AUDIO Input Connections are available for listening to stereo sound from an external device. VIDEO Input Connects the video signal from a video device. INTRODUCTION CableCARDTM Used for CableCARDTM Cable Service Provider AV OUT Connect a second TV or monitor. AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. COMPONENT IN Connect a component video/audio device to these jacks. HDMI IN Connect a HDMI signal to 1(DVI) or 2. Or DVI(VIDEO)signal to the 1(DVI) port with a DVI to HDMI cable. DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. ANTENNA IN Connect over-the air signals to this jack. CABLE IN Connect cable signals to this jack. RGB/AUDIO IN Connect the monitor output from a PC to the appropriate input port. Remote Control Port Connect your wired remote control. Power Cord Socket For operation with AC power. Caution : Never attempt to operate the TV on DC power. 13 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MODE Select the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. 14 INTRODUCTION I Use for DVR record or trick play. Controls the mode. p .67, 75 mode control buttons VCR/DVD buttons DAY+/DAY- I I For further details, see the D V R section. Control video cassette recorders or DVD players. Move the Listings Grid forward or backward in 24 hour increments. Displays the main menu. Enters or exits a Panel Menu in the TV Guide On Screen system. Displays the TV Guide On Screen system. Enter to the mode. p . 40 MENU TV GUIDE THUMBSTICK Navigate the on-screen menus and adjust the system (Up/Down/Left Right/ENTER) settings to your preference. EXIT Clear all on-screen displays and return to TV viewing from any menu. REC LIST Display the thumbnail recorded list. MARK Enter the selected functions. p .73 p .120 p . 72 i INFO Display information at the top of the screen. VOLUME UP Increase/decrease the sound level. /DOWN MUTE Switch the sound on or off. p.39 FAV Scroll through the programmed Favorite channels. CHANNEL Select available channels. UP/DOWN PAGE UP/ Move from one full set of screen information PAGE DOWN to the next one. NUMBER button FLASHBK Tune to the last channel viewed. -- (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. APM CC AUTO DEMO M/C EJECT POWER Turns your TV or any other programmed equipment on or off, depending on the mode. LIVE TV In AV 1-2, Component 1-2, RGB-DTV (or RGB-PC), HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGBDTV (or RGB-PC), HDMI1/DVI and HDMI2 (AV 1-2, Component 1-2, RGB-DTV (or RGB-PC), HDMI1/DVI, and HDMI2 input sources are linked automatically, only if these are connected ). Inside the Sliding Cover INTRODUCTION PIP Switches the sub picture PIP, POP, Twin picture or off mode. p. 78 PIPCH-/PIPCH+ Changes the PIP channel. p. 79 PIP INPUT Select the connected input source for the sub-picture. p. 79 SWAP Exchange the main/sub images. p. 80 SAP Select MTS sound: Mono, Stereo, and SAP analog mode. Change the audio language DTV mode. TIMER Select the amount of time before your TV turns off automatically. p .111 RATIO Change the aspect ratio. p .113 Adjust the screen ADJUST position,size,and phase in PC mode. p .35 EZ PIC Adjust the factory preset picture depend on the viewing environment. APM Compare the Daylight, Normal, Night Time and User1(or2) on the screen. p. 91 EZ SOUND Select the appropriate type of sound for type of program. CC Select closed caption. (*In DTV/CADTV modes p. 114 p. 115) Installing Batteries Remote control effective range I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Don't mix old or used batteries with new ones. Close cover. LIVE TV INPUT LIVE TV INPUT MODE MODE DAY - DAY + DAY - DAY + I I Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. Dispose of used batteries in a recycle bin to preserve environment. I I 15 INSTALLATION ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don't climb on or hang from the TV. 16 INSTALLATION I 50PC1DR/50PC1DRA 42LB1DR/42LB1DRA Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. *Insert the eye-bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. 600mm 400 mm VESA Mounting These 4 threaded holes are available for attaching the bracket provided with the accessory wall-mount installation kit. WIRE ARRANGEMENT 50PC1DR/50PC1DRA 1 Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. INSTALLATION 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. 3 Install the CABLE MANAGEMENT as shown. 17 INSTALLATION WIRE ARRANGEMENT 42LB1DR/42LB1DRA 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT CABLE HOLDER 18 INSTALLATION 2 How to remove the CABLE MANAGEMENT G Hold the CABLE MANAGEMENT with both hands and pull it backward. 3 Bundle the cables using the supplied twister holder. NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken. TWISTER HOLDER Swivel Stand (Only 42LB1DR/42LB1DRA) The TV can be conveniently swiveled on its stand 30° to the left or right to provide the optimum viewing angle. I I This manual explains the features available on the 50PC1DR, 50PC1DRA seriesTVs. Here shown may be somewhat different from your TV. INSTALLATION Power Supply Short-circuit Breaker GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4 in. on each side and the top, 2.36 in. on the bottom, and 4 in. from the wall. 50PC1DR/50PC1DRA 4 inches 4 inches 42LB1DR/42LB1DRA 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches CAUTION Ensure adequate ventilation by following the clearance recommendations. 19 CONNECTIONS & SETUP ANTENNA OR CABLE CONNECTION 1. Antenna (analog or digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) CABLE IN CABLE IN ANTENNA IN Wall Antenna Socket 20 CONNECTIONS & SETUP CABLE IN Outdoor Antenna (VHF, UHF) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Bronze Wire Be careful not to bend the bronze wire when connecting the antenna. 2. Cable ANTENNA IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) CABLE IN 3. Using both cable and antenna ANTENNA IN Antenna RF Coaxial Wire (75 ohm) CABLE IN Cable TV Wall Jack RF Coaxial Wire (75 ohm) CABLE IN CABLE IN CABLE IN ANTENNA IN Antenna UHF VHF Signal Amplifier CABLE IN To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV's, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance. I I CONNECTIONS & SETUP NOTE The TV will let you know when the analog, cable, and digital channel scans are complete. CABLECARDTM SETUP 1. How to use Insert the CableCARDTM from your cable service provider into the CableCARDTM slot on the back of your TV. If pairing information about this TV and the CableCARD is displayed on the screen, contact your cable service provider. NOTE Cable CARD This TV supports CableCARDTM technology from Motorola, Scientific Atlanta, and SCM. CAUTION When removing, do not drop it as this may cause damage to the CableCARDTM. 21 CONNECTIONS & SETUP HDSTB SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). When connecting Component cable CONNECTIONS & SETUP 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the set. Y PB PR L R 2 2. How to use I Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select COMPONENT 1 input source with using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select COMPONENT 2 input source. Signal 480i 480p 720p 1080i Component 1/2 Yes Yes Yes Yes RGB-DTV, HDMI1/DVI, HDMI2 No Yes Yes Yes S-VIDEO VIDEO AUDIO COMPONENT IN I I ANTENNA IN CABLE IN 22 ANTENNA IN When connecting D-sub 15pin cable 1. How to connect 1 2 Connect the RGB output of the digital set-top box to the R G B (PC/DTV) jack on the set. Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set. RGB IN CABLE E IN AUDIO (RGB/DVI) REMOTE CONTROL IN RGB (PC/DTV) (PC DTV) CONNECTIONS & SETUP 2. How to use I Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select RGB-DTV input source with using the INPUT button on the remote control. I RGB OUTPUT L