User manual ZENITH VRA422 - OPERATING GUIDE

Operating Guide and Warranty for your new Zenith Entertainment Machine Models VRA412 VRA422 thanks for choosing zenith RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your new VCR are located on the back of the VCR cabinet. For your future convenience, we suggest that you record these numbers here: SAFETY TIPS: Refer to the "Safety Tips" leaflet that came with your product for Important Safety Instructions. MODEL NO.____________________________________ SERIAL NO.____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. POWER CORD POLARIZATION: CAUTION: To Prevent Electric Shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user's authority to operate this product. This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. "Ce appareil numérique de la class b respecte toutes les exigences du Règulement sur le matériel brouillier du Canada." I N S TA L L AT I O N PAGE 3 VCR Features Chart FEATURES SpeakEZ Function 4-Heads (Special Video Effects) Full Load/Quick Start Auto Head Cleaner Audio System Audio/Video (A/V) Jacks Remote Control MBR412 Auto/Manual Band Select Auto/Manual Channel Search Channel Capability (CATV & TV) Record Speeds SP/EP Playback Speeds SP/LP/EP Auto Playback System Auto/Manual Digital Tracking Instant Recording Timer-Controlled Recording Auto Playback Tape Speed Adjust Forward/Reverse Slow-Motion Video (4-head VCR) Pause/Still Video Real-Time Tape Counter Speed Search CM Skip English/Spanish/French Menus 1-Year, 8-Event Timer LED Clock Front Panel Display Auto Clock Set System Hook-up Cable (VCR to TV) VRA412 X X X X Monaural Monaural X X X 181 X X X X X X X X Variable 1/10 to 1/32 X X X X X X X X X VRA422 X X X X MTS Hi-Fi Stereo Stereo X X X 181 X X X X X X X X Variable 1/10 to 1/32 X X X X X X X X X This page shows the features of your VCR and the differences between the models 1. Model VRA422 is used for the description, operation, and details provided in this operating guide. 2. VCR design and specifications are subject to change without prior notice. X = Feature is provided N/A = Feature is Not Available PAGE 4 I N S TA L L AT I O N Required connections for your VCR Connections for your VCR Connections Without a Cable Box Antenna Flat Wire (300 ohm) Back Panel of Stereo VCR ANT IN VHF/UHF/CATV OUT TO TV OR OR 300/75 ohm Adaptor (Not provided) R-AUDIO-L OUT CH3 CH4 VIDEO OUT IN IN Cable TV Wall Jack Back Panel of Typical TV IN OUT IN VHF/UHF/CATV OUT R AUDIO L VIDEO ANT IN This cable is provided with your VCR. Turn off power or unplug VCR before making any connections. Connections With a Cable Box Back Panel of Stereo VCR ANT IN VHF/UHF/CATV OUT TO TV Back Panel of Typical TV IN OUT IN VHF/UHF/CATV OUT R-AUDIO-L OUT CH3 CH4 VIDEO OUT R AUDIO L VIDEO ANT IN IN IN Back Panel of Typical Cable Box CH3 CH4 Cable TV Wall Jack CABLE OUT IN This cable is provided with your VCR. Turn off power or unplug VCR before making any connections. I N S TA L L AT I O N PAGE 5 Connections for your VCR Audio/Video (A/V) Connections to TV Use A/V connections for a better picture. Optional connections for your VCR Back Panel of Stereo VCR ANT IN VHF/UHF/CATV OUT TO TV Back Panel of Typical TV OUT IN R-AUDIO-L OUT IN VIDEO VHF/UHF/CATV R-AUDIO-L OUT CH3 CH4 VIDEO OUT ANT IN IN IN Turn off power or unplug VCR before making any connections. A/V cable is not provided with VCR. Back Panel of Monaural VCR ANT IN VHF/UHF/CATV OUT TO TV Back Panel of Typical Monaural TV AUDIO VIDEO OUT IN VHF/UHF/CATV AUDIO OUT CH3 CH4 VIDEO ANT IN IN Note: If the back panel on your TV is different, refer to the TV's operating guide. A/V cable is not provided with VCR. Accessory Audio/Video (A/V) Connections to VCR Back Panel of Stereo VCR ANT IN VHF/UHF/CATV OUT TO TV Jack panel of Accessory Accessory Component: Another VCR, Camcorder, Video Camera, Satellite Receiver, Laser Disc Player OUT IN R-AUDIO-L OUT IN VIDEO R-AUDIO-L OUT CH3 CH4 VIDEO OUT IN IN Turn off power or unplug VCR before making any connections. A/V cable is not provided with VCR. PAGE 6 I N S TA L L AT I O N Things you must do before you can operate your VCR Before you operate your VCR CLOCK MENU AUTO CLOCK SET(ON): 1 MANUAL CLOCK SET : 2 PROGRAM 1 MONTH : DAY : START : STOP : CHANNEL : SPEED : REPEAT : ( 1 - 8 ) to select program ENTER to adjust program SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 AUDIO MENU SpeakEZ: ON 1 ON 2 OFF PLAYBACK: RECORD: Press number keys then ENTER QUIT = exit Press number keys QUIT = exit Press number keys QUIT = exit CLOCK TIMER SETUP AUDIO Press NUMBER (1, 2, 3, 4) button SpeakEZ CLOCK TIMER SETUP AUDIO : : : : 1 2 3 4 Note: Audio menu's PLAYBACK and RECORD options are available only with stereo VCRs. Press number keys QUIT = exit MAIN MENU 1 Connect the Power (Required) Plug your VCR into an unswitched 120 Vac, 60 Hz household power outlet. Turn on the VCR by pressing the POWER on the remote or on the VCR's front panel. Do not plug the VCR into a switched power outlet. Otherwise, when the power is switched off, the VCR turns off. You may then have to reset the time and date, and reprogram operational features. TYPICAL ZENITH VCR WALL SWITCH POWER OUTLET 2 Set Position of the CH3/CH4 Switch (Required) The CH3/CH4 switch on the VCR's back panel determines which channel the VCR uses to send video signals to your TV. The TV must be tuned to the same channel you set with the CH3/CH4 switch to see tape playback and status displays from the VCR. To determine which video channel provides the best picture for your system, try the switch in CH3 position and tune your TV to channel 3; then try the CH4 position and tune your TV to channel 4. For a test display, press TV/VCR on remote repeatedly until the VCR indicator appears in the VCR's front panel display. Press MENU on the remote to see the main menu. power stop/eject rew play f fwd pause sp/ep ch rec/itr AM VCR REC PM TMR CH3 CH4 Tune TV to Ch.3 OR CH3 CH4 Tune TV to Ch.4 I N S TA L L AT I O N PAGE 7 Before you operate your VCR Point remote toward VCR How to Access Menus 1. Press MENU to see Main Menu. 2. Press NUMBER (1, 2, 3, or 4) to see desired sub menu to be used. 3. Press NUMBER to choose desired option to be changed. 4. Press QUIT/CC to exit menu, or wait a few minutes and the VCR returns to normal operation. power cbl/ vcr dbs tv program Chooses and modifies options enter Things you must do before you can operate your VCR eject vol enter ch vol ch mute pause 1 f fwd 2 5 8 0 menu 3 6 9 rew play 4 7 stop rec/itr 1 4 7 tv/vcr 2 5 8 0 a adj menu memory 3 6 9 cm skip quit/cc sel sel quit/cc sp/ep Selects VCR tuner tv/vcr 3 Select SpeakEZ Function ON/OFF A voice tells you how to use the features in the menus if SpeakEZ is ON. (ON is recommended.). See the AUDIO Menu for details. SpeakEZ only functions with ENGLISH. Press 4. SpeakEZ CLOCK TIMER SETUP AUDIO : : : : 1 2 3 4 AUDIO MENU SpeakEZ: ON 1 ON 2 OFF PLAYBACK: RECORD: Press number keys then ENTER QUIT = exit Press number keys QUIT = exit MAIN MENU Press NUMBER (1 or 2) to choose ON or OFF 4 Select Language for VCR Menus/Displays (Optional) Select English, Spanish, or French for VCR menus and status displays. See the LANGUAGE SELECT option on the SETUP menu for details. Press 5. SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 SETUP MENU LANGUAGE SELECT : ENGLISH 1 ENGLISH 2 ESPAÑOL 3 FRANÇAIS Press number keys then ENTER QUIT = exit Press number keys QUIT = exit SETUP MENU Press NUMBER (1, 2, or 3) to select the desired language PAGE 8 I N S TA L L AT I O N Some things you must do and others you may want to do before you can operate your VCR Before you operate your VCR 5 Set Date and Time for Clock Set the clock in the VCR to the current date and time. See CLOCK Menu for details. Your VCR also has an Auto-Clock Set feature. See CLOCK Menu for details. The Timer features will not function unless the Clock has been set. Press 2. CLOCK MENU AUTO CLOCK SET(ON): 1 MANUAL CLOCK SET : 2 MONTH DAY YEAR TIME CLOCK MENU : : : : 1 JANUARY 1 THU 1998 12:00 PM Press number keys then ENTER QUIT = exit Press number keys QUIT = exit CLOCK MENU Press NUMBER (0-9) then ENTER to set date and time 6 Select Source for VCR (Optional) Set the source of the VCR for the type of program signal you have connected to the ANT IN jack on the back of the VCR. Choose TV if you have an antenna connected to the VCR. Choose CATV if you have a cable system (with or without a cable box) connected to the VCR. Choose AUX if you have an accessory Audio/Video (A/V) connected to the VCR. See SOURCE option on SETUP menu for details. Press 3. SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 SETUP MENU SOURCE: TUNER (TV) 1 TV 2 CATV 3 AUX Press number keys then ENTER QUIT = exit Press number keys QUIT = exit SETUP MENU Press NUMBER (1, 2, or 3) to select the desired source 7 Use Auto Program to Find Channels (Required) Use AUTO PROGRAM to find active channels in your broadcast area. AUTO PROGRAM stores the active channels that you can access by using the Channel Up/Down arrows. See AUTO PROGRAM on the SETUP Menu for details. Press 1. SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 SETUP MENU AUTO PROGRAM: SEARCHING QUIT = exit Press number keys QUIT = exit SETUP MENU 8 Use CH. ADD/DEL to Create Favorite Channels (Optional) Use CH. ADD/DEL to change the list of active channels found when using AUTO PROGRAM, so you can list your favorites. See CH.ADD/DEL on the SETUP Menu for details. Press 2. SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 SETUP MENU CH. ADD/DEL: CH. 2 ADD Press number keys then ENTER QUIT = exit Press number keys QUIT = exit Press NUMBER (0-9) then ENTER SETUP MENU I N S TA L L AT I O N PAGE 9 Before you operate your VCR 9 Select Other Menu Options Show or hide the VCR status on your screen by using the ON-SCREEN DISPLAY option on the SETUP menu. We recommend keeping this option ON. See the SETUP menu for details. Press 4. SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 SETUP MENU Things you may want to do before you operate your VCR. ON-SCREEN DISPLAY: ON 1 ON 2 OFF Press number keys then ENTER QUIT = exit Press number keys QUIT = exit Press NUMBER (1 or 2) to choose ON or OFF SETUP MENU If you have a stereo VCR, select the audio format (HI-FI or NORMAL) to use when you play a tape. We recommend setting this option to HI-FI. See the PLAYBACK MODE option on the AUDIO Menu for details. Press 4. SpeakEZ CLOCK TIMER SETUP AUDIO : : : : 1 2 3 4 AUDIO MENU SpeakEZ: PLAYBACK: HI-FI RECORD: Press number keys then ENTER QUIT = exit 1 HI-FI 2 NORMAL Press number keys QUIT = exit MAIN MENU Press NUMBER (1 or 2) to choose HI-FI or NORMAL If you have a stereo VCR, select the audio format (STEREO, MONO or SAP) to use when recording. We recommend using STEREO. See the RECORD MODE option on the AUDIO Menu for details. Press 4. SpeakEZ CLOCK TIMER SETUP AUDIO : : : : 1 2 3 4 AUDIO MENU SpeakEZ: PLAYBACK: RECORD: STEREO 1 STEREO 2 MONO 3 SAP Press number keys then ENTER QUIT = exit Press number keys QUIT = exit MAIN MENU Press NUMBER (1, 2 or 3) to choose STEREO, MONO, or SAP PAGE 10 C O N T R O L S A N D D I S P L AY S Descriptions of items you need to know to operate your VCR. Front Panel Diagram Front Panel Controls These controls perform basic VCR operations--some of them light up as you use them. The Remote performs basic as well as advanced VCR operations. Cassette Compartment POWER On/Off Button Stop/Eject Selector Recording Speed Selector Channel Up/Down Selector power stop/eject rew play f fwd pause sp/ep ch rec/itr AM VCR REC PM TMR LED Clock Front Panel Display PLAY, REW (Rewind), F FWD (Fast Forward), PAUSE Selector REC/ITR (Instant Timer Record) Selector LED Clock Front Panel Indicators Clock Time A Cassette is in the VCR VCR functions are available and channels are selected at VCR VCR is Recording Front Panel Display shows which VCR function you are using. For example, when you press SP/EP, SP or EP appears to indicate the tape speed. As you change channels, the channel numbers appear. The current time shows even while the VCR is off. Other messages include: AU Auxiliary channel is selected for viewing equipment connected to the Audio/Video jack on the front or rear of the VCR. Extended Play speed is selected. Standard Play speed is selected. AM VCR REC PM TMR Time is AM Time is PM VCR is in timer recording EP SP -: -- Clock is not set. Err Error: Turn VCR On and OFF to erase "Err" message. If it is not erased, take VCR to an authorized repair center. C O N T R O L S A N D D I S P L AY S PAGE 11 VCR Status Displays Current mode of operation (STOP, PAUSE, RECORD, PLAY, etc.) and audio format of tape, where Play=HI-FI or NORMAL (No display) Tape Speed EP=Extended Play LP=Long Play SP=Standard Play Current date, day, and time PLAY HI-FI VCR CH 11 SP ST/SAP Current CH (Channel) selected by using tuner in VCR Audio format of signal received by VCR tuner: STEREO, MONO or ST/SAP On-Screen displays tell you the status of the tape inserted and VCR functions. 15 MON 7:17 AM M-1:35:45 Typical VCR Status Display on TV Real-time tape counter M = Counter Memory is active ­ = Tape is rewound past index mark. 1:35:45 = Length of tape (in time) 1 = 1 hour 35 = 35 minutes 45 = 45 seconds M-1:35:45 Tape Counter Position REM 1:35 Tape Time Remaining VCR Status Display The VCR Status Display appears on the TV when a VCR function starts, like when you change a channel or select a different VCR mode. For example, pressing STOP while the VCR is in PLAY mode shows STOP in the display. Press ENTER on the remote at any time (except Special Effect Playback mode; SLOW, STILL etc.) to see the Status Display. Note: If the VCR Status Display does not appear on the TV screen, check the ON-SCREEN DISPLAY option on the SETUP menu. Select ON to see the display. See "VCR Menu Operations" section for details. VCR Status Display Options When the Status Display appears, press ENTER repeatedly to see abbreviated displays, as follows: 1. Press ENTER to see Status Display. 2. Press ENTER a second time to show only the tape counter position. 3. Press ENTER a third time to show only the tape time remaining. 4. Press ENTER repeatedly until all displays are removed. PAGE 12 O P E R AT I O N A quick list of all the buttons on your remote control and what they do. The Buttons on Your Remote Remote Control Operation Installing Batteries power stop/eject rew play f fwd pause sp/ep ch rec/itr AM VCR REC PM TMR AA Select VCR Mode, aim at VCR Select TV Mode, aim at TV Select CBL(DBS) Mode, aim at cable box or DBS AA POWER Button power cbl/ vcr dbs tv program eject vol enter ch vol ch mute pause CBL VCR/DBS/TV MODE Selector rew play f fwd stop rec/itr 1 4 7 tv/vcr 2 5 8 0 a adj menu memory 3 6 9 cm skip Selecting Mode of Operation 1. Slide VCR/CBL(DBS)/TV selector to desired position for VCR, cable box (DBS), or TV operation. 2. 3. Press POWER to turn On/Off the selected equipment. Refer to instructions with TV and/or cable box (DBS) for operation. Be sure to install the batteries provided with this remote. Match positive (+) and negative (-) with markings shown in battery compartment. After installing batteries, the remote resets to the following brand codes: TV = 100, CABLE = 300 Note: All VCR operations and menu options can be accessed by using the remote control. sel sel quit/cc sp/ep A -- Feature is not available. ADJ (ADJUST Left/Right) -- Adjusts tape playback tracking while in VCR mode. Use to change status of TV menu options while in TV mode. CH (Up/Down) -- Changes favorite channels. Also selects AUX A/V input channel. CM SKIP -- Fast forwards picture search through 30 seconds of recording. EJECT -- Ejects the tape in the VCR. ENTER -- Programs menu options and shows VCR status display. F FWD (Fast Forward)--Advances tape rapidly. MEMORY -- Returns real-time tape counter to zero (M 0:00:00). MENU -- Shows main menu. Accesses Zenith TV menus while in the TV mode. MUTE -- Press to turn off TV sound. Press again to restore TV sound. Numbers -- Chooses channels and enters programming information. PAUSE -- Pauses tape temporarily during playback or record. PLAY -- Begins tape playback. POWER -- Turns VCR On and Off. Also turns VCR Timer Off and On, if programmed. PROGRAM -- Programs remote with brand codes for your brand of TV and/or cable box (DBS). QUIT/CC -- Exits menu system. Selects closed caption for some TVs while in TV mode. REC/ITR -- Begins tape recording. REW -- Rewinds tape to the beginning. SEL (SELECT Up/Down) -- Chooses TV on-screen menu options while in TV mode. SP/EP -- Chooses tape recording speed. STOP -- Cancels playback or record modes. TV/VCR SOURCE -- Switches source of TV picture between TV channel and VCR channel selection. VCR functions are available in TV mode. VCR/CBL(DBS)/TV -- Selects operational mode of remote. VOLUME (Up/Down) -- Changes volume of TV. O P E R AT I O N PAGE 13 Programming Your Remote Some functions of your products may not be controlled by this remote. In such cases, use the original remote control furnished with the product. If you are using Zenith products, the remote comes programmed for the most commonly used codes. For other brands -- or if your remote fails to control your Zenith product -- you will have to program the remote. Follow these steps for each product: pause rew play f fwd power cbl/ vcr dbs tv program CBL VCR/DBS/TV Mode Selector Program Button eject vol enter ch vol ch mute 1. Locate the three-digit code for your brand and type of equipment in the code tables below. 2. Slide VCR/CBL(DBS)/TV to choose TV or cable box (DBS) mode of operation. 3. Press and hold PROGRAM while entering the brand code for your equipment. 4. Enter the three-digit brand code and then release PROGRAM. If your equipment does not work, repeat steps 3 and 4, or try a different brand code. 5. Write down the code that operates your equipment. TV , CATV , DBS Your remote control operates the common features of most, but not all, models and brands of IR (infrared) controlled TVs and cable converters (DBS). stop rec/itr 1 4 7 tv/vcr 2 5 8 0 a adj menu memory 3 6 9 cm skip sel sel quit/cc sp/ep TV Codes by Brand TV Brand Name Codes Admiral Citizen Curtis Mathes Daewoo Daytron Emerson Fisher Funai General Electric Goldstar Hitachi JCPenney JVC KTV LXI Magnavox MGA/Mitsubishi NEC Panasonic Philco Philips Pioneer Proscan Quasar Radio Shack RCA Realistic Samsung Sanyo 151, 152, 110, 144 156, 157, 158, 160, 161, 162 115, 130, 113, 118, 144, 151 145, 146, 147, 148, 149, 150 130, 115 110, 111, 115, 131, 140, 143 116, 125 153, 154 102, 118, 127, 128, 144, 151 115, 122, 130, 131, 133, 146 119, 131, 132 102, 115, 124, 130, 133 109, 141 115, 130, 131, 138 104, 116, 123, 124, 125, 131 100, 101, 106, 107, 109, 114 115, 121, 122, 130, 131, 133 103, 115, 130 115, 130 104, 122, 127, 128, 133, 163 115, 121, 122, 131, 130, 150 121, 122 134 118, 144, 151 127, 128 110, 111, 129 118, 144, 151 110, 111, 129 104, 115, 130, 131 116, 125 XR1000 Zenith Symphonic Toshiba Wards Scott Sears Sharp Sony Sylvania TV Codes by Brand TV Brand Name Codes 115, 130 104, 116, 123, 124, 125, 131 112, 129, 131, 139 105 106, 107, 115, 121, 122, 130 133 153, 154 104, 123, 124 102, 113, 114, 115, 121, 130 131 155 100, 101 Cable Converter Codes by Brand Cable Decoder Brand Name Panasonic Paragon Philips Pioneer Pluser RCA Regal Regency Samsung Scientific Atlanta Simarx Sprucer Standard Components Stargate Teleview Texscan Tocom Uniden Unika Universal Vid Tech Video Way Viewstar Zenith Codes 313, 320 300 306, 307, 308, 309, 310 318, 319 336 318 310 304 334 317, 347, 335, 354 318, 327 318, 320, 327 334 318, 327, 328 336 303 315, 316 348 336 351, 352 339 349 306, 307, 310 300, 305, 311 Cable Converter Codes by Brand Cable Decoder Brand Name Arccher Cableview Citizen Curtis Mathes Eagle GE Gemini Gobrand Hamlin Jerrold Kale Vision Macom Magnavox NSC OAK 336 336 336 317 306, 307, 310 353 302, 328, 333 336 314, 330, 331 323, 324, 325, 326, 329 334 311, 312, 342 307, 310, 337, 338 332, 334 301, 321, 322 Codes Montgomery Wards 115, 129, 131, 103, 113, 121 General Instrument 327, 328 DBS Codes by Brand DBS Brand Name Codes RCA Sony 356 355 PAGE 14 O P E R AT I O N Introducing you to the Main Menu selections Main Menu CLOCK MENU AUTO CLOCK SET(ON): 1 MANUAL CLOCK SET : 2 Press number keys QUIT = exit PROGRAM 1 MONTH : DAY : START : STOP : CHANNEL : SPEED : REPEAT : ( 1 - 8 ) to select program ENTER to adjust program SETUP MENU AUTO PROGRAM: CH. ADD/DEL: SOURCE: ON-SCREEN DISPLAY: LANGUAGE SELECT: 1 2 3 4 5 AUDIO MENU SpeakEZ: ON 1 ON 2 OFF PLAYBACK: RECORD: Press number keys then ENTER QUIT = exit Press number keys QUIT = exit CLOCK TIMER SETUP AUDIO Press NUMBER (1, 2, 3, 4) button SpeakEZ CLOCK TIMER SETUP AUDIO : : : : 1 2 3 4 Press number keys QUIT = exit MAIN MENU How to Access Menus Menu operation is easy--just follow the instructions shown at the bottom of the menu. Point remote toward VCR 1. Press MENU to see main menu. 2. Press NUMBER (1, 2, 3, or 4) to see desired sub menu to be used. 3. Press NUMBER to choose desired option to be changed. 4. Press QUIT/CC to exit menu, or wait a few minutes and the VCR returns to normal operation. power cbl/ vcr dbs tv program Chooses and modifies options enter eject vol enter ch vol ch mute pause 1 f fwd 2 5 8 0 menu 3 6 9 rew play 4 7 stop rec/itr 1 4 7 tv/vcr 2 5 8 0 a adj menu memory 3 6 9 cm skip quit/cc sel sel quit/cc sp/ep Note: Perform menu operations with the VCR and TV on, and tune the TV to channel 3 or 4. The VCR must also be in the VCR mode of operation. Press TV/VCR repeatedly until VCR indicator appears in the front panel. Selects VCR tuner tv/vcr O P E R AT I O N PAGE 15 Clock Menu The Clock Menu sets the clock in the VCR to the current time. There are two options. AUTO and MANUAL The Clock Menu sets the clock in VCR to the current time. Auto Clock Set