User manual ZEROTHERM CF900

Installation Guide Please read this installation guide carefully before installation Model Specifications Items ZEROtherm CF700, CF800, CF900 Models CF700 CF800 Intel LGA775 Socket (Pentium 4, Pentium D) CF900 Platform Heat Pipe Heatsink Material Weight(g) Size(mm) Noise(dBA) Fan Speed(rpm) Connector 3EA(Nickel Plating) Aluminum 342 4EA(Nickel Plating) Aluminum 357 L100 x W94 x H77 16 ~ 30 ± 10% 900 ~ 2300 ± 10% 4EA Copper 562 4pin 3wire with automatic control by temperature sensor Components CPU Cooler (CF700/CF800/CF900) Back Plate Spring Screw Thermal Grease Installation 1) Remove the paper film from the upper surface of a back plate to use an insulating tape. 2) Attach the back plate to the back side of a motherboard with the socket RM (Retention Mechanism) holes lined up. 3) Place the cooler on a CPU with all of mounting screw holes well aligned. 4) To guarantee the maximum cooler performance of the heat pipe-based cooler, ZEROtherm, the RIGHT installation to the right DIRECTION is VERY important as shown in picture (1). The rests (2-4) are NOT PROPERLY installed ones. 5) Fasten the spring screws fitting on the RM holes. : (O) Bent Heat Pipes : (X) Memory Slot : (X) : (X) Features Fan Speed (rpm) 2300 1) Copper-based heat pipe cooling system for maximum thermal performance. 2) MAX performance and MIN noise with optimized heat block and fin structure. 3) The upscale exterior with nickel-plated heat pipes and a transparent fan 900 Internet, Music 3D Game, Animation 4) Slim design to fit nearly all PC cases available in the market. 5) Model: CF700 & CF800 Extremely light weight (under 360g) with aluminum fins 6) Model: CF900 Maximized performance with copper fins CPU Temp. (oC) Warranty Warranty : 1 year from the date of purchase with a proper receipt. Exception : Warranty does not cover products broken by user's fault. URL : http://www.apack.net Email : service@apack.net Patent Patent for Design : 30-2005-0023049 Registered Trademark : 40-0564565-0000 Installation Guide Please read this installation guide carefully before installation Note Although ZEROtherm's fan speed is very low, ZEROtherm can perfectly cool the CPU. It is possible that a few kinds of motherboards (including ASUS one) report "CPU Fan Error!" and stop booting. This error message has nothing to do with a real system error. When "CPU Fan Error!" alerts, set the Bios up as followings BIOS Set-up Booting Error ­ CPU Fan Error Bios Setup ­ Boot tap A few kinds of motherboards (including ASUS one) may report "CPU Fan Error" Press "DEL" button on your keyboard to set the Bios up. Select "Boot" tap and "Boot Settings Configuration" Boot Settings Configuration Wait For `F1' If Error Options Select "Wait For `F1' If Error Press "Enter" button on you keyboard. Switch its options into "Disabled". Wait For `F1' If Error ­ Disabled Save configuration changes and exit Now Wait For `F1' If Error options are Disabled. Press "F10" button on your keyboard. Select "OK", when the prompt ask if you want to save configuration changes and exit now.