User manual ZOOM GFX-5

Operation Manual USAGE AND SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Ready to Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 4 6 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Getting connected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Playing Patches (Play Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Panel display in play mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Selecting a patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Using the internal tuner (bypass/mute function) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Adjusting the sound of a patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Using the Rhythm Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turning Effects On and Off With Your Feet (Manual Mode) . . . . . . . . . . . 16 Changing the Sound of a Patch (Edit Mode) . . . . . . . . . . . . . . . . . . . . . . . 17 Patch configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Basic edit mode steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Changing a patch name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Storing and Swapping Patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Changing effects in real time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Using the hold delay function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using the sampler function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Calibrating the expression pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Resetting the GFX-5 to the factory default condition . . . . . . . . . . . . . . . . . . . . . . . . .27 Effect Types and Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BOOST module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 ISO/COMP (Isolator/Compressor) module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 DRIVE module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 EQ (Equalizer) module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ZNR (ZOOM Noise Reduction) module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 CABINET module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 MOD (Modulation) module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 REV (Delay/Reverb) module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 TOTAL module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 GFX-5 Patch List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited. USAGE AND SAFETY PRECAUTIONS SAFETY PRECAUTIONS Caution Introduction Thank you for selecting the ZOOM GFX-5. This product is a sophisticated Guitar Effects Processor with the following features. Environment Avoid using your GFX-5 in environments where it will be exposed to: · · · · Extreme temperature High humidity or moisture Excessive dust or sand Excessive vibration or shock In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows: Versatile array of effects This symbol indicates explanations about extremely dangerous matters. If users Warning ignore this symbol and handle the device the wrong way, serious injury or death could result. This symbol indicates explanations about dangerous matters. If users ignore this symbol and handle the device the wrong way, bodily injury and damage to the equipment could result. Handling Caution Since the GFX-5 is a precision electronic device, avoid applying excessive force to the switches and buttons. Also take care not to drop the unit, and do not subject it to shock or excessive pressure. Alterations Caution The Variable Architecture Modeling System (VAMS) developed by ZOOM adapts the internal configuration of the unit to achieve exactly the desired sound. The GFX-5 provides 74 choices, ranging from distortion and modulation effects to booster functions and a cabinet simulator that duplicates the sound of various guitar amps. pedal to adjust the modulation depth of the ARRM feature. Integrated drum machine Caution Never open the case of the GFX-5 or attempt to modify the product in any way since this can result in damage to the unit. Full complement of distortion effects 60 built-in rhythm patterns using natural-sounding PCM sources are available, which is great for practice or a quick jam session. ARRM cycles can be synchronized to the rhythm tempo, letting you alter effects in sync with the flow of the music. The creative possibilities are limitless. Please observe the following safety tips and precautions to ensure hazard-free use of the GFX-5. Caution Connecting cables and input and output jacks You should always turn off the power to the GFX-5 and all other equipment before connecting or disconnecting any cables. Also make sure to disconnect all cables and the AC adapter before moving the GFX-5. Power requirements Warning Since power consumption of this unit is fairly high, we recommend the use of an AC adapter whenever possible. When powering the unit from batteries, use only alkaline types. [AC adapter operation] · Be sure to use only an AC adapter which supplies 9 V DC, 300 mA and is equipped with a "center minus" plug (Zoom AD-0006). The use of an adapter other than the specified type may damage the unit and pose a safety hazard. · Connect the AC adapter only to an AC outlet that supplies the rated voltage required by the adapter. · When disconnecting the AC adapter from the AC outlet, always grasp the adapter itself and do not pull at the cable. · When not using the unit for an extended period, disconnect the AC adapter from the AC outlet. 33 distortion type effects not only recreate the characteristics of famous vintage amps but also duplicate the sound and operation of renowned compact effects and pedals. The [TURBO] key lets you boost the sound pressure in an instant, and the [EDGE] key creates a bright treble edge. A wide variety of drive sounds are only a keypress away. 6-second sampling feature Usage Precautions · Electrical interference For safety considerations, the GFX-5 has been designed to provide maximum protection against the emission of electromagnetic radiation from inside the device, and protection from external interference. However, equipment that is very susceptible to interference or that emits powerful electromagnetic waves should not be placed near the GFX-5, as the possibility of interference cannot be ruled out entirely. With any type of digital control device, the GFX-5 included, electromagnetic interference can cause malfunctioning and can corrupt or destroy data. Care should be taken to minimize the risk of damage. 120 ready-to-use patches A guitar phrase or the signal from an input source such as a CD player can be sampled for up to 6 seconds and stored in the internal memory. The recorded sample can be played back at a slower speed without altering the pitch. This is a great tool for enhancing a live performance or for copying a lick or fast-playing phrase. Effect module setting combinations can be stored as patches. The GFX-5 offers 60 user patches which can be freely modified, plus 60 preset patches. Together, these 120 settings let you make great music straight away. Energize creates dynamic sound The Energize is another innovation with immense appeal. Simply by turning a knob, you can optimize the sound characteristics to match the playback system. Enjoy powerful, dynamic sound even with a small guitar amp or an audio system with flat response. Intuitive operation and key layout [Battery operation] · Use four conventional IEC R6 (size AA) batteries (alkaline). · The GFX-5 cannot be used for recharging. Pay close attention to the labelling of the battery to make sure you choose the correct type. · When not using the unit for an extended period, remove the batteries from the unit. · If battery leakage has occurred, wipe the battery compartment and the battery terminals carefully to remove all remnants of battery fluid. · While using the unit, the battery compartment cover should be closed. · Cleaning Use a soft, dry cloth to clean the GFX-5. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface. The knobs and keys on the panel of the unit are designed for maximum usability. Choose distortion types or adjust equalizer settings in a flash. The expression pedal is great for controlling effect parameters in real time. The GFX-5 practically comes alive during a performance. Designed for use on stage Newly developed ARRM feature Please keep this manual in a convenient place for future reference. ARRM (Auto-Repeat Real-time Modulation) is a fascinating concept. Using built-in control waveforms, it lets you rhythmically shape the signal in many ways. Create totally novel sounds that will captivate listeners. You can even use the expression The GFX-5 can be powered either from an AC adapter or from batteries. With one set of alkaline batteries, the unit will operate continuously for up to 10 hours. A special mode lets you switch major effects on or off with your foot or specify the rhythm tempo during a performance. Operate the unit like compact effects, while accessing a vast array of functions. 2 ZOOM GFX-5 ZOOM GFX-5 3 Controls and Functions Controls and Functions Drive section Top Panel Drive section Equalizer section Energize section [ENERGIZE] knob [EDGE] key [TURBO] key [VARIATION] key [GAIN] knob [VARIATION] LED [DRIVE] knob AMPDRV Equalizer section [BASS] knob [PRESENCE] knob [TREBLE] knob [MIDDLE] knob BANK [Q]/[W] foot switches Foot switches [1] ­ [3] Expression pedal Display [VALUE] dial PARAMETER [Q]/[W] keys [CONTROL] key [CONTROL] LEDs [ASSIGN] key Rear Panel [GROUP/BANK] indicator AMPDRV [AUX IN] jack [INPUT] jack [LEVEL] knob [PHONES] jacks [DC IN] jack [POWER] switch [BOOST] key [ISO/COMP] key [DRIVE] key [TOTAL] key [REV] key [ASSIGN] LEDs [TEMPO/TAP] key [RHYTHM] key [SAMPLER] key [STORE] key [EDIT/EXIT] key [OUTPUT L/MONO]/[OUTPUT R] jacks [MOD] key [CABINET] key [EQUALIZER] key [ZNR] key Effect Module keys 4 ZOOM GFX-5 ZOOM GFX-5 5 Getting Ready to Play Getting Ready to Play Inserting the batteries To use the GFX-5 on battery power, insert batteries as shown below. NOTE · When not using the unit for an extended period, remove the batteries to prevent the possibility of damage by leaking battery fluid. When the indication "BATT" appears on the display, the batteries are almost exhausted. Replace the batteries as soon as possible with fresh ones. Connect the guitar output jack to the [INPUT] jack on the GFX-5. When using only one guitar amp, connect it to the [OUTPUT L/MONO] jack. By connecting another guitar amp to the [OUTPUT R] jack, you can achieve reverb and chorus sound with a wide stereo spread. · Guitar Guitar amps 1. Turn the unit over and open the battery compartment cover. (Push the tab to unlock and then raise the cover.) Battery compartment cover Loop the cable of the AC adapter around the hook before connecting it to the [DC IN] jack. This will prevent the plug from being disconnected if the cable is accidentally pulled. BATT Getting connected 1. Make sure that the amplifier and the GFX-5 are switched off. CD player or other source Connect the separately available AC adapter (ZOOM AD-0006) here. GFX-5 bottom OPEN Tab Turn the volume at the amplifier to minimum. To sample a signal from a CD or MD player or similar, connect the player output to the [AUX IN] jack. AC adapter Headphones 2. Insert the batteries with correct (+) (-) polarity into the battery compartment. Four IEC R6 (size AA) batteries 2. To power the unit from the AC adapter, insert the small plug of the adapter cable into the [DC IN] jack on the GFX-5. Then plug the adapter into an AC outlet. Connect the guitar to the [INPUT] jack of the GFX-5, using a mono cable. Connect the [OUTPUT] jack of the GFX-5 to the guitar amp, using a mono cable. To monitor the sound with headphones, plug the phones into the [PHONES] jack. Turn power on in the following order: GFX-5 amplifier. NOTE If you turn the GFX-5 on while the amplifier is already powered up, damage to the speaker may result. Always turn power to the amplifier on last. When turning off the system, proceed in the opposite order. The [ENERGIZE] knob serves to match the unit to the playback environment. As you turn the knob, the display changes as follows. Battery compartment cover 3. 4. ENERGY 15 Energize setting (oF, 1 - 30) 7. Battery polarity alternates for each slot. 5. 6. Raise the volume setting of the instrument and amplifier, and adjust the [LEVEL] knob on the rear panel of the GFX-5. While playing your instrument, turn the [ENERGIZER] knob until the sound quality is as desired. 8. Turning the knob clockwise emphasizes the low range, and turning it counterclockwise emphasizes the high range. The "oF" setting means that the Energize function is turned off. HINT The Energize setting applies to the output sound of all signals except those from the [AUX IN] jack. 3. Close the battery compartment cover. (Make sure that the tab is properly engaged.) 9. ZOOM GFX-5 ZOOM GFX-5 To turn the system off, proceed in the opposite order than when turning it on. 6 7 Quick Guide When you turn on the GFX-5, it is in play mode. This section explains the basic steps in this mode, allowing you to use the unit right away. Changing the sound of a patch in play mode While playing your instrument, operate the following knobs and keys. [Drive section] [TURBO] key Setting this key to ON will increase the sound pressure of the patch. [VARIATION] key/[DRIVE] knob Serve to select the distortion type. [GAIN] knob Adjusts the distortion depth. Quick Guide Selecting a patch To select a patch, press one of the foot switches [1] - [3] whose LED is not lit. The single effects (effect modules) in the GFX-5 can be combined, and parameter settings for each effect can be changed to achieve a desired sound. Such a combination of effects with certain parameter settings is called a patch. Patches are always called onto the panel in banks of three, and the foot switches [1] - [3] are used to select the patch. [Display in play mode] [EDGE] key Setting this key to ON will emphasize the high frequency content of the patch. AMPDRV [Equalizer section ] The knobs adjust boost/cut for each frequency range. AMPDRV Patch name Group Bank number [BASS] knob [TREBLE] knob [PRESENCE] knob [MIDDLE] knob For a detailed explanation of how to edit effects, see page 17. To switch to a patch in another group or bank, use the BANK [Q]/[W] foot switches and then the foot switches [1] - [3]. Patches are organized in user groups (U, u) which can be modified and preset groups (A, b) which are read-only. Each group comprises ten banks numbered from 0 to 9, and each bank has three patches. The BANK [Q]/[W] foot switches select groups and banks in the order A0 ­ A9, b0 ­ b9, U0 ­ U9, u0 ­ u9. * You can also use the PARAMETER [Q]/[W] keys to directly switch groups. For a detailed explanation of patch switching, see page 10. User groups BANK 9 BANK 9 BANK BANK BANK 2 BANK 2 BANK 2 BANK 2 BANK222 BANK222 BANK BANK BANK BANK BANK 2 BANK 2 BANK 12 BANK 12 BANK 0 BANK 0 PATCH 1 PATCH 1 2 PATCH PATCH 2 3 PATCH PATCH 3 PATCH 1 PATCH 1 2 PATCH PATCH 2 3 PATCH PATCH 3 Altering an effect with the pedal 1 Move the expression pedal up or down while playing your instrument. The effect depth or volume or another parameter of the effect will change in real time as you move the expression pedal. (Which parameter changes depends on the patch.) * For some patches, the pedal has no effect. Storing effects 1 Press the [STORE] key. 2 To switch the effect module on or off, push the expression pedal fully down. The expression pedal also incorporates a push-down switch that allows on/off control of a specific effect module. For an explanation of how to select the module to be operated with the pedal, see page 20. The GFX-5 goes into store standby mode. STORE? If necessary, use the BANK [Q]/[W] foot switches and the foot switches [1] - [3] to select the bank and patch number in which to store the current effect settings. * If a patch from a preset group was selected, the patch number 1 of "U0" (user group) will be selected as the default store target. Preset groups BANK 9 BANK 9 BANK BANK BANK 2 BANK 2 BANK 2 BANK 2 BANK222 BANK222 BANK BANK BANK BANK BANK 2 BANK 2 BANK 12 BANK 12 BANK 0 BANK 0 PATCH 1 PATCH 1 2 PATCH PATCH 2 3 PATCH PATCH 3 PATCH 1 PATCH 1 2 PATCH PATCH 2 3 PATCH PATCH 3 For an explanation of effect control with the pedal, see page 20. 2 To carry out the store process, press the [STORE] key once more. To cancel the operation, press the [EDIT/EXIT] key. Group U Group u Group A Group b Move back and forth Push down all the way For a detailed explanation of the store procedure, see page 19. For information on how to return the user group patches to the factory default condition, see page 27 8 ZOOM GFX-5 ZOOM GFX-5 9 Playing Patches (Play Mode) Playing Patches (Play Mode) The condition where you call up patches stored in the memory of the GFX-5 and use them for playing your instrument is called play mode. When you turn the GFX-5 on, it is initially always in this mode. The various operations possible in play mode are described in this section. In play mode, the panel shows the following information. Using the internal tuner (bypass/mute function) The GFX-5 has a built-in auto-chromatic tuner for guitars. To use the tuner function, the built-in effects must be bypassed (temporarily turned off) or the unit must be muted (original sound and effect sound turned off). The note is shown on the left part of the indicator. A A B C C D D E F F G G Panel display in play mode Patch name A8 Pitch is sharp Correct pitch Pitch is flat Group (A/b/U/u) Bank number (0 - 9) When a dot (.) is shown here, an effect parameter has been changed. When a dot (.) is shown here, patches can be selected from a user group or preset group. 1. AMPDRV To set the GFX-5 to the bypass (mute) condition, press the foot switch of the currently selected patch (the switch whose LED is lit) in play mode. Keys for effect modules that are ON in the currently selected patch are lit. Pressing and immediately releasing the foot switch sets the GFX-5 to the bypass condition. The expression pedal is automatically switched to function as a volume pedal. Bypass Release immediately The more the pitch is off, the faster the rotation of the indicator. 3. Selecting a patch 1. To select a patch in play mode, press one of the foot switches [1] - [3] whose LED is not lit. To directly switch groups, use the PARAMETER [Q]/[W] keys. 3. To change the reference pitch of the tuner, use the [VALUE] dial. Pressing the PARAMETER [Q] key moves to the next higher group and pressing the PARAMETER [W] key moves to the next lower group. The LED of the foot switch for the patch that is currently selected is lit. U0 A0 B0 BYPASS Pressing and holding the foot switch for more than one second sets the GFX-5 to the mute condition. The current reference pitch is briefly shown on the display. The default setting after power-on is center A = 440 Hz. 440HZ Reference pitch value NOTE If you press the foot switch whose LED is lit, the unit goes into bypass/mute mode ( p. 11). 4. 2.To select a patch in another group or bank, use the BANK [Q]/[W] foot switches and then the foot switches [1] - [3] to select the group and bank. For example, if you repeatedly press the BANK [Q] foot switch, the group/bank is switched as follows. If you want to select only patches from a user group or preset group, press both PARAMETER[Q] /[W] keys together. Mute Press and release after more than 1 second Each time you press both PARAMETER [Q]/[W] keys together, the group type changes. MUTE 2. Play the open string you want to tune. The [GROUP/BANK] indicator shows the note which is closest to the current pitch. Adjust the pitch so that the indicator shows the desired note. While the reference pitch is shown, you can change the pitch by turning the [VALUE] dial. The setting range is 435 - 445 Hz in 1-Hz steps. When the GFX-5 is turned off and on again, it will be reset to 440 Hz. 4. Both group User groups only Preset groups only To return to the play mode, press one of the foot switches [1] - [3]. A1 Dot is lit The patch of that foot switch becomes active again. User groups NOTE If you switch the bank/group while using the tuner, the tuner function will be temporarily disabled. When you return to the original bank/ group, the tuner function becomes active again. U0 Preset groups U9 B9 A0 A1 A9 B0 10 ZOOM GFX-5 ZOOM GFX-5 11 Playing Patches (Play Mode) Playing Patches (Play Mode) 3. Adjusting the sound of a patch After selecting a patch in play mode, you can use the knobs and keys on the panel to adjust parameters such as distortion type and depth, equalizer settings, etc. To adjust the gain (distortion depth) of the DRIVE module, turn the [GAIN] knob in the drive section. Low range Mid range Very high range High range PATLVL HINT 25 When you turn the knob, the current gain setting appears on the [GROUP/BANK] indicator, and the "EDITED" dot appears. When you return the gain to the original setting, the dot disappears. Any changes you have made in play mode will be lost when you switch the patch. If necessary, store the patch to retain the changes ( p. 19). 1. 2. In play mode, select the patch you want to use. To change the distortion type, use the [DRIVE] knob and [VARIATION] key in the drive section. GAIN 20 When a dot is shown here, an effect parameter was edited. While you operate a knob, the display shows the name of the current range, and the [GROUP/ BANK] indicator shows the current setting (-12 ­ 0 ­ 12). NOTE If you turn the [GAIN] knob while a patch is selected for which the DRIVE module is off, the indication "-OFF-" appears on the display and the knob has no effect. The distortion type used for the DRIVE module can be switched with the [DRIVE] knob and [VARIATION] key. Turn the [DRIVE] knob to select a general distortion category (amp or effect pedal type), and use the [VARIATION] key to select a variation within that category. Each push of the [VARIATION] key cycles through the CLASSIC STANDARD MODERN OFF (DRIVE module off) settings, and the corresponding LED lights up. For details on category and variation characteristics, see page 29. (1) Select general distortion category with [DRIVE] knob. BASS G NOTE 10 -OFF4. If necessary, use the [TURBO] key or [EDGE] key to adjust the overall sound of the patch. If you turn a knob in the equalizer section while a patch is selected for which the EQUALIZER module is off (effect module [EQUALIZER] key not lit), the indication "-OFF-" appears on the display and the knob has no effect. Press the [EQUALIZER] key to turn it on first. The [TURBO] key and [EDGE] key let you touch up the sound of each patch. The [TURBO] key increases the overall sound pressure (intensity) of the patch, and the [EDGE] key enhances the treble. You can also set both keys to ON together. 6. To switch an effect module on or off, press the effect module key for that module. Lit Out (DRIVE module is off) (2) Select variation in selected category with [VARIATION] key. The light of the effect module key comes on or goes out, and the module is toggled between on and off. 5. To provide EQ adjustment, use the knobs in the equalizer section. 7. NOTE If you turn the [DRIVE] knob or push the [VARIATION] key while a patch is selected for which the DRIVE module is off (effect module [DRIVE] key not lit), the DRIVE module is automatically turned on ([DRIVE] key lights up). The knobs in the equalizer provide boost or cut in the following ranges. To adjust the overall volume level of the patch (patch level), turn the [VALUE] dial. The patch level is a parameter that controls the combined original sound and effect sound level. It can be set in the range of 1 - 30. During adjustment, the [GROUP/BANK] indicator shows the actual setting. 12 ZOOM GFX-5 ZOOM GFX-5 13 Using the Rhythm Function Using the Rhythm Function The GFX-5 incorporates 60 rhythm patterns which can be selected for playback. This is convenient for practice or a quick jam session. Rhythm pattern list Rhythm pattern 8 BEAT 1 8 BEAT 2 Display Indicator Rhythm pattern DANCE 1 DANCE 2 DANCE 3 FUNK 1 FUNK 2 BALLAD 1 BALLAD 2 BLUES 1 BLUES 2 COUNTRY BOSSA NOVA JAZZ 1 JAZZ 2 REGGAE Display Indicator 1 2 8BEAT 1 DANCE 1. To activate the rhythm function, press the [RHYTHM] key in play mode. The key lights up and rhythm pattern playback starts. The [TEMPO/TAP] key flashes in sync with the current tempo. HINT The tempo set in this way can be synchronized to the control waveform cycle for the ARRM function ( p. 20). It can also be linked to the DELAY TIME parameter of the REV module ( p. 34). 2 3 1 2 1 2 1 2 8 BEAT 3 8 BEAT 4 8 BEAT 5 8 BEAT SHUFFLE 1 8 BEAT SHUFFLE 2 3 4 5 1 2 1 2 3 4 FUNK BALLAD BLUES CONTRY BOSSA JAZZ REGGAE SKA LATIN SAMBA AFRO MOTOWN EURO FUSION OLDIES 8SHUFL 4. 8BEAT Pattern name 1 Pattern number To change the volume of the rhythm sound, press the PARAMETER [Q]/[W] keys during rhythm pattern playback to bring up the indication "LVL xx" (where xx is a number) on the display, and then turn the [VALUE] dial. 16 BEAT 1 16 BEAT 2 16 BEAT 3 16 BEAT 4 16 BEAT SHUFFLE 3/4 6/8 ROCK 16BEAT 16SHFL 3/4 6/8 5/4 1 2 The rhythm pattern playback volume changes. 2. To change the rhythm pattern, turn the [VALUE] dial while the rhythm pattern name is shown on the display. To change the tempo, press the [TEMPO/ TAP] key and then turn the [VALUE] dial. LVL 20 Rhythm pattern playback volume 5/4 5/4 ROCK ROCK'n ROLL 1 ROCK'n ROLL 2 1 2 1 2 1 2 1 SKA LATIN 1 LATIN 2 SAMBA 1 SAMBA 2 AFRO MOTOWN EUROBEAT FUSION OLDIES METRO (triple time) METRO (quadruple time) METRO (quintuple time) METRO (sextuple time) METRO (septuple time) 1 2 1 2 3. HINT By pressing one of the PARAMETER [Q]/[W] keys repeatedly, you can cycle through the rhythm pattern name, tempo, and playback volume indication. ROCK 1 ROCK 2 1970s ROCK HARD ROCK 1 HARD ROCK 2 HARD ROCK 3 METAL 1 When you press the [TEMPO/TAP] key, the current tempo setting (BPM) appears on the display. While this is shown, turning the [VALUE] dial will change the tempo. ROCK 70ROCK HARD 5. BPM120 Rhythm pattern tempo To stop rhythm pattern playback, press the [RHYTHM] key once more. 2 3 1 2 3 4 METRO HINT · When the GFX-5 is in manual mode ( p. 16), you can use the BANK [W] switch to bring up the tempo indication on the display or to set the tap tempo. · If a rhythm pattern is played while editing a patch, only the tempo can be changed. METAL 2 THRASH PUNK POP 1 POP 2 METAL THRASH PUNK POP 5 6 7 If you tap the [TEMPO/TAP] key repeatedly, the interval of the last two taps is automatically detected and taken as the new tempo (tap tempo setting function). 1 2 METRO METRO Tap repeatedly 14 ZOOM GFX-5 ZOOM GFX-5 15 Turning Effects On and Off With Your Feet (Manual Mode) Manual mode is a special mode in which you can use the foot switches to turn effect modules on and off or to change the rhythm pattern tempo. This is useful for example if you want to turn only certain effect modules on and off during a performance. Changing the Sound of a Patch (Edit Mode) The edit mode allows you to freely alter the parameters that make up a patch, so that you can create your own patches. This section describes how to do this. 1. To switch the GFX-5 to manual mode, hold the BANK [Q] switch depressed while the unit is in play mode. 3. To change the tempo of the rhythm pattern, tap the BANK [W] switch repeatedly in the desired interval. INPUT OUTPUT The indication "MANUAL" appears on the display, showing that the GFX-5 has switched to manual mode. The interval of the last two taps is automatically detected and taken as the new tempo. Patch configuration Each patch of the GFX-5 consists of several effects (effect modules), as shown in the illustration above. A patch is a stored combination of modules, each with their distinct parameter settings. Within each module, there are several different but related effects which are called effect types. For example, the MOD (modulation) module comprises effect types such as CHORUS, PHASER, and WAH, of which one can be selected. The elements that determine the sound of a patch are called effect parameters. Each module has certain effect parameters, whose value can be adjusted with the effect module keys, PARAMETER [Q]/[W] keys, [VALUE] dial, etc. MANUAL BPM 95 patches from a preset group are read-only. When you have altered such a patch and you want to store it, you must select a user group patch as store target (patch number 1 in the user group bank "U0" is automatically preselected). 2. To activate the edit mode, press the [EDIT/EXIT] key. Tap repeatedly The first time you switch to edit mode after the unit was turned on, the parameter PATLVL (patch level) of the TOTAL module will be selected. 2. To switch effect modules on and off, press one of the foot switches [1] - [3]. PATLVL 3. 20 HINT By programming a patch beforehand to link the ARRM control waveform ( p. 20) or the DELAY TIME parameter of the REV module ( p. 34) to the pattern tempo, you can control these parameters manually during a performance. When the GFX-5 is in manual mode, the modules DRIVE, MOD, and REV can be turned on and off with foot switches [1] - [3]. The modules are assigned as follows. Lit: module is on Press the effect module key for the module that you want to edit. The effect type currently selected for that module is shown on the display. Effect type Out: module is off 4. To return to play mode, press the BANK [Q] switch once more. NOTE Also within the same module, different effect types will have different parameters. ROOM HINT If a module is selected that is currently off, the key flashes more slowly. Basic edit mode steps DRIVE module MOD module REV module This section describes the basic procedure for editing patches in edit mode. For information on effect types and parameters in the various modules, see the section "Effect Types and Parameters" on pages 28 ­ 34. 4. To toggle the on/off status of the selected module, press the same key again while the effect type is being shown. The effect type display changes to "-OFF-". 1. In play mode, select the patch you want to edit. Patches for editing can be selected from either a user group (U/u) or a preset group (A, b). However, To return the effect module to "on" status, press the key again.